KINGBRIGHT APC3216YC

3.2X1.6mm SMD CHIP LED LAMP
Part Number: APC3216YC
Features
YELLOW
Description
z3.2X1.6mm
SMT LED, 1.1mm THICKNESS.
The Yellow source color devices are made with Gallium
zLOW
POWER CONSUMPTION.
Arsenide Phosphide on Gallium Phosphide Yellow Light
zWIDE
VIEWING ANGLE.
Emitting Diode.
zIDEAL
FOR BACKLIGHT AND INDICATOR.
zVARIOUS
COLORS AND LENS TYPES AVAILABLE.
zPACKAGE:
2000PCS / REEL .
zMOISTURE
SENSITIVITY LEVEL : LEVEL 3.
zRoHS
COMPLIANT.
Package Dimensions
Notes:
1.All dimensions are in millimeters (inches).
2.Tolerance is ±0.2(0.008") unless otherwise noted.
3.Specifications are subject to change without notice.
4.The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAD1001
REV NO: V.2
DATE: APR/18/2007
PAGE: 1 OF 5
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: D.M.LIU
ERP: 1203001015
Selection Guide
Dice
Part No.
APC3216YC
Iv (mcd) [2]
@ 20mA
Lens Type
YELLOW (GaAsP/GaP)
Viewing
Angle [1]
Min.
Typ.
2θ1/2
2.6
8
120°
WATER CLEAR
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak
Peak Wavelength
Yellow
λD [1]
Dominant Wavelength
Δλ1/2
Typ.
Max.
Units
Test Conditions
590
nm
IF=20mA
Yellow
588
nm
IF=20mA
Spectral Line Half-width
Yellow
35
nm
IF=20mA
C
Capacitance
Yellow
20
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Yellow
2.1
2.5
V
IF=20mA
IR
Reverse Current
Yellow
10
uA
VR = 5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Yellow
Units
Power dissipation
75
mW
DC Forward Current
30
mA
Peak Forward Current [1]
140
mA
Reverse Voltage
5
V
Operating / Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAD1001
REV NO: V.2
DATE: APR/18/2007
PAGE: 2 OF 5
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: D.M.LIU
ERP: 1203001015
Yellow
APC3216YC
SPEC NO: DSAD1001
REV NO: V.2
DATE: APR/18/2007
PAGE: 3 OF 5
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: D.M.LIU
ERP: 1203001015
APC3216YC
Recommended Soldering Pattern
(Units : mm; Tolerance: ±0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAD1001
REV NO: V.2
DATE: APR/18/2007
PAGE: 4 OF 5
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: D.M.LIU
ERP: 1203001015
PACKING & LABEL SPECIFICATIONS
APC3216YC
SPEC NO: DSAD1001
REV NO: V.2
DATE: APR/18/2007
PAGE: 5 OF 5
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: D.M.LIU
ERP: 1203001015