3.0mmx1.0mm RIGHT ANGLE SMD CHIP LED LAMP APBA3010SGNC SUPER BRIGHT GREEN PURE ORANGE Description Features 3.0mmx1.0mm RIGHT ANGLE SMT LED, 2.0mm The Super Bright Green source color devices are made THICKNESS. with Gallium Phosphide Green Light Emitting Diode. LOW POWER CONSUMPTION. The Pure Orange source color devices are made with WIDE VIEWING ANGLE. Gallium Arsenide Phosphide on Gallium Phosphide Pure IDEAL FOR BACKLIGHT AND INDICATOR. Orange Light Emitting Diode. VARIOUS COLRS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD1094 REV NO: V.2 DATE: DEC/23/2003 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: L.Y.WU PAGE: 1 OF 5 Selection Guide Part No. Dice Iv (mcd) @ 20mA Lens Type SUPER BRIGHT GREEN (GaP) APBA3010SGNC Viewing Angle Min. Typ. 2.6 12 4 12 WATER CLEAR PURE ORANGE (GaAsP/GaP) 2θ θ1/2 140° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Super Bright Green Pure Orange λD Dominate Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 565 607 nm IF=20mA Super Bright Green Pure Orange 568 610 nm IF=20mA Spectral Line Half-width Super Bright Green Pure Orange 30 35 nm IF=20mA C Capacitance Super Bright Green Pure Orange 15 15 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Green Pure Orange 2.2 2.05 2.5 2.5 V IF=20mA IR Reverse Current All 10 uA VR= 5V Absolute Maximum Ratings at TA=25°C Parameter Super Bright Green Pure Orange Units Power dissipation [2] 105 105 mW DC Forward Current 25 25 mA Peak Forward Current [1] 140 145 mA 5 5 V Reverse Voltage Operating / Storage Temperature -40℃ To +85℃ Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1094 REV NO: V.2 DATE: DEC/23/2003 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: L.Y.WU PAGE: 2 OF 5 APBA3010SGNC Super Bright Green SPEC NO: DSAD1094 REV NO: V.2 DATE: DEC/23/2003 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: L.Y.WU PAGE: 3 OF 5 Pure Orange SPEC NO: DSAD1094 REV NO: V.2 DATE: DEC/23/2003 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: L.Y.WU PAGE: 4 OF 5 APBA3010SGNC SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAD1094 REV NO: V.2 DATE: DEC/23/2003 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: L.Y.WU PAGE: 5 OF 5