3.0x2.5mm SURFACE MOUNT LED LAMP APBL3025SRQGCPR-F01 SUPER BRIGHT RED GREEN Features Description 3.0mmx2.5mm SMT LED, 1.4mm THICKNESS. LOW POWER CONSUMPTION. The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting WIDE VIEWING ANGLE. IDEAL FOR BACK LIGHT AND INDICATOR. Diode. VARIOUS COLORS AND LENS TYPES AVAILABLE. The Green source color devices are made with Gallium INNER LENS TYPE Phosphide Green Light Emitting Diode. PACKAGE : 2000PCS / REEL. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAF1333 REV NO: V.1 DATE: MAR/29/2005 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1203000916-01 Selection Guide Part No. Dice Iv (mcd) @ 20mA Lens Type SUPER BRIGHT RED (GaAlAs) APBL3025SRQGCPR-F01 Viewing Angle Min. Typ. 36 100 7 20 2θ θ1/2 100° WATER CLEAR GREEN (GaP) Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Super Bright Red Green λD Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 660 560 nm IF=20mA Super Bright Red Green 640 565 nm IF=20mA Spectral Line Half-width Super Bright Red Green 20 30 nm IF=20mA C Capacitance Super Bright Red Green 45 45 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Red Green 1.85 2.15 2.5 2.5 V IF=20mA IR Reverse Current All 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Super Bright Red Green Units Power dissipation 100 105 mW DC Forward Current 30 25 mA Peak Forward Current [1] 155 130 mA Reverse Voltage 5 Operating/Storage Temperature V -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF1333 REV NO: V.1 DATE: MAR/29/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1203000916-01 APBL3025SRQGCPR-F01 Super Bright Red SPEC NO: DSAF1333 REV NO: V.1 DATE: MAR/29/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1203000916-01 Green SPEC NO: DSAF1333 REV NO: V.1 DATE: MAR/29/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1203000916-01 APBL3025SRQGCPR-F01 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAF1333 REV NO: V.1 DATE: MAR/29/2005 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1203000916-01