3.0x2.5mm SURFACE MOUNT LED LAMP APB3025SRQGCPRV-F01 SUPER BRIGHT RED GREEN Features Description 3.0mmx2.5mm SMT LED, 1.1mm THICKNESS. BI -COLOR,LOW POWER CONSUMPTION. The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. Diode. VARIOUS COLORS AND LENS TYPES AVAILABLE. The Green source color devices are made with Gallium PACKAGE : 2000PCS / REEL. Phosphide Green Light Emitting Diode. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAF1327 REV NO:V.1 DATE:MAR/29/2005 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:B.H.LI ERP: 1203000738-01 Selection Guide Part No. Dice Iv (mcd) @ 20mA Lens Type SUPER BRIGHT RED (GaAlAs) APB3025SRQGCPRV-F01 Viewing Angle Typ. 36 100 4 12 Units Test Conditions WATER CLEAR GREEN (GaP) 2θ θ1/2 Min. 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. λpeak Peak Wavelength Super Bright Red Green 660 560 nm IF=20mA λD Dominant Wavelength Super Bright Red Green 640 565 nm IF=20mA ∆λ1/2 Spectral Line Half-width Super Bright Red Green 20 30 nm IF=20mA C Capacitance Super Bright Red Green 45 45 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Red Green 1.85 2.15 2.5 2.5 V IF=20mA IR Reverse Current All 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Super Bright Red Green Units 100 105 mW Power dissipation DC Forward Current 30 25 mA Peak Forward Current [1] 155 130 mA Reverse Voltage 5 Operating / Storage Temperature V -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF1327 REV NO:V.1 DATE:MAR/29/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:B.H.LI ERP: 1203000738-01 APB3025SRQGCPRV-F01 Super Bright Red SPEC NO: DSAF1327 REV NO:V.1 DATE:MAR/29/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:B.H.LI ERP: 1203000738-01 Green SPEC NO: DSAF1327 REV NO:V.1 DATE:MAR/29/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:B.H.LI ERP: 1203000738-01 APB3025SRQGCPRV-F01 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAF1327 REV NO:V.1 DATE:MAR/29/2005 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:B.H.LI ERP: 1203000738-01