1.6x1.25mm BI-COLOR SMD CHIP LED LAMP APTB1612ESGC Features HIGH EFFICIENCY RED SUPER BRIGHT GREEN Description 1.6mmx1.25mm SMT LED, 0.65mm THICKNESS. The High Efficiency Red source color devices are made BI-COLOR,LOW POWER CONSUMPTION. with Gallium Arsenide Phosphide on Gallium Phosphide WIDE VIEWING ANGLE. Orange Light Emitting Diode. IDEAL FOR BACKLIGHT AND INDICATOR. The Super Bright Green source color devices are made VARIOUS COLORS AND LENS TYPES AVAILABLE. with Gallium Phosphide Green Light Emitting Diode. PACKAGE : 2000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD1078 REV NO: V.2 DATE: MAR/01/2005 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.CHENG ERP: 1203002009 Selection Guide Part No. Dice Iv (mcd) @ 20mA Lens Type Min. Typ. 4 12 4 12 HIGH EFFICIENCY RED (GaAsP/GaP) APTB1612ESGC Viewing Angle WATER CLEAR SUPER BRIGHT GREEN (GaP) 2θ θ1/2 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red Super Bright Green λD Dominant Wavelength ∆λ1/2 Max. Units Test Conditions 627 565 nm IF=20mA High Efficiency Red Super Bright Green 625 568 nm IF=20mA Spectral Line Half-width High Efficiency Red Super Bright Green 45 30 nm IF=20mA C Capacitance High Efficiency Red Super Bright Green 15 15 pF VF=0V;f=1MHz VF Forward Voltage High Efficiency Red Super Bright Green 2.0 2.2 2.5 2.5 V IF=20mA IR Reverse Current All 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Super Bright Green Units Power dissipation 105 105 mW DC Forward Current 30 25 mA Peak Forward Current [1] 160 140 mA Reverse Voltage 5 Operating / Storage Temperature V -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1078 REV NO: V.2 DATE: MAR/01/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.CHENG ERP: 1203002009 APTB1612ESGC High Efficiency Red SPEC NO: DSAD1078 REV NO: V.2 DATE: MAR/01/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.CHENG ERP: 1203002009 Super Bright Green SPEC NO: DSAD1078 REV NO: V.2 DATE: MAR/01/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.CHENG ERP: 1203002009 APTB1612ESGC SMT Reflow Soldering Instructions Number of reflow process shall be 2 times or less and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAD1078 REV NO: V.2 DATE: MAR/01/2005 PAGE: 5 OF 5 DRAWN: Y.CHENG ERP: 1203002009 D i g i t a l l y APPROVED: J. Lu CHECKED: Allen Liu s i g n e d b y N I N G T I N G c n = N I N G T I N G , o = N I N G T I N G , c = C N D a t e : 2 0 0 5 . 0 3 . 0 2 1 3 : 5 2 : 5 4 + 0 8 '0 0 'R e a s o n : < n o n e >