3.2x1.0mm RIGHT ANGLE BI-COLOR SMD CHIP LED LAMP Part Number: APBA3210ESGC-F01 PRELIMINARY SPEC High Efficiency Red Super Bright Green Features Description z LOW POWER CONSUMPTION. The High Efficiency Red source color devices are made with z 3.2mmX1.0mm RIGHT ANGLE SMT LED,1.5mm Gallium Arsenide Phosphide on Gallium Phosphide Orange THICKNESS. Light Emitting Diode. z WIDE VIEWING ANGLE. The Super Bright Green source color devices are made with z PACKAGE : 2000PCS / REEL. Gallium Phosphide Green Light Emitting Diode. z MOISTURE SENSITIVITY LEVEL : LEVEL 3. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAF1091 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 1 OF 6 ERP: 1203003900 Selection Guide Part No. Dice Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 4 12 4 12 High Efficiency Red (GaAsP/GaP) APBA3210ESGC-F01 WATER CLEAR Super Bright Green (GaP) Viewing Angle [1] 2θ1/2 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red Super Bright Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 627 565 nm IF=20mA High Efficiency Red Super Bright Green 625 568 nm IF=20mA Spectral Line Half-width High Efficiency Red Super Bright Green 45 30 nm IF=20mA C Capacitance High Efficiency Red Super Bright Green 15 15 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red Super Bright Green 2 2.2 2.5 2.5 V IF=20mA IR Reverse Current High Efficiency Red Super Bright Green 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Super Bright Green Units Power dissipation 75 62.5 mW DC Forward Current 30 25 mA Peak Forward Current [1] 160 140 mA Reverse Voltage 5 Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C V Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF1091 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 2 OF 6 ERP: 1203003900 APBA3210ESGC-F01 High Efficiency Red SPEC NO: DSAF1091 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 3 OF 6 ERP: 1203003900 Super Bright Green SPEC NO: DSAF1091 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 4 OF 6 ERP: 1203003900 APBA3210ESGC-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAF1091 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 5 OF 6 ERP: 1203003900 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAF1091 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu APBA3210ESGC-F01 DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 6 OF 6 ERP: 1203003900