1.6x1.5mm BI-COLOR SMD CHIP LED LAMP Part Number: APTB1615ESGC-F01 High Efficiency Red Super Bright Green Features Description z1.6mmx1.5mm SMT LED, 0.7mm THICKNESS. The High Efficiency Red source color devices are made with zLOW POWER CONSUMPTION. Gallium Arsenide Phosphide on Gallium Phosphide Orange zWIDE VIEWING ANGLE. Light Emitting Diode. zIDEAL FOR BACKLIGHT AND INDICATOR. The Super Bright Green source color devices are made with zVARIOUS COLORS AND LENS TYPES AVAILABLE. Gallium Phosphide Green Light Emitting Diode. zPACKAGE : 2000PCS / REEL. zMOISTURE SENSITIVITY LEVEL : LEVEL 3. zRoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAF1101 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 1 OF 6 ERP: 1203002079 Selection Guide Part No. Dice Lens Type High Efficiency Red (GaAsP/GaP) APTB1615ESGC-F01 Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 4 12 4 12 WATER CLEAR Super Bright Green (GaP) 2θ1/2 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red Super Bright Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 627 565 nm IF=20mA High Efficiency Red Super Bright Green 625 568 nm IF=20mA Spectral Line Half-width High Efficiency Red Super Bright Green 45 30 nm IF=20mA C Capacitance High Efficiency Red Super Bright Green 15 15 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red Super Bright Green 2 2.2 2.5 2.5 V IF=20mA IR Reverse Current High Efficiency Red Super Bright Green 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Super Bright Green Units Power dissipation 75 62.5 mW DC Forward Current 30 25 mA Peak Forward Current [1] 160 140 mA Reverse Voltage 5 Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C V Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF1101 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 2 OF 6 ERP: 1203002079 APTB1615ESGC-F01 High Efficiency Red SPEC NO: DSAF1101 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 3 OF 6 ERP: 1203002079 Super Bright Green SPEC NO: DSAF1101 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 4 OF 6 ERP: 1203002079 APTB1615ESGC-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAF1101 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 5 OF 6 ERP: 1203002079 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAF1101 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu APTB1615ESGC-F01 DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 6 OF 6 ERP: 1203002079