3.0x2.0mm RIGHT ANGLE SMD LED Part Number: APBDA3020ESGC PRELIMINARY SPEC High Efficiency Red Super Bright Green Features Description z 3.0mmx2.0mm SMT LED,2.8mm THICKNESS. The High Efficiency Red source color devices are made with z LOW POWER CONSUMPTION. Gallium Arsenide Phosphide on Gallium Phosphide Orange z VARIOUS COLORS AND LENS TYPES AVAILABLE. Light Emitting Diode. z IDEAL FOR BACK LIGHT AND INDICATOR The Super Bright Green source color devices are made with z PACKAGE : 2000PCS / REEL. Gallium Phosphide Green Light Emitting Diode. z WHEN SOLDERED IN THE SIDEVIEW CONFIGURATION, THE MAXIMUM SHEAR TOLERANCE OF THE EPOXY LENS IS 300G. z MOISTURE SENSITIVITY LEVEL : LEVEL 3. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH7983 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: SEP/28/2007 DRAWN: C.WANG PAGE: 1 OF 6 ERP: 1203007282 Selection Guide Part No. Dice High Efficiency Red (GaAsP/GaP) APBDA3020ESGC Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 4 18 4 18 WATER CLEAR Super Bright Green (GaP) Viewing Angle [1] 2θ1/2 15° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red Super Bright Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 627 565 nm IF=20mA High Efficiency Red Super Bright Green 625 568 nm IF=20mA Spectral Line Half-width High Efficiency Red Super Bright Green 45 30 nm IF=20mA C Capacitance High Efficiency Red Super Bright Green 15 15 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red Super Bright Green 2 2.2 2.5 2.5 V IF=20mA IR Reverse Current High Efficiency Red Super Bright Green 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Super Bright Green Units Power dissipation 75 62.5 mW DC Forward Current 30 25 mA Peak Forward Current [1] 160 140 mA Reverse Voltage 5 Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C V Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH7983 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: SEP/28/2007 DRAWN: C.WANG PAGE: 2 OF 6 ERP: 1203007282 APBDA3020ESGC High Efficiency Red SPEC NO: DSAH7983 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: SEP/28/2007 DRAWN: C.WANG PAGE: 3 OF 6 ERP: 1203007282 Super Bright Green SPEC NO: DSAH7983 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: SEP/28/2007 DRAWN: C.WANG PAGE: 4 OF 6 ERP: 1203007282 APBDA3020ESGC Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH7983 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: SEP/28/2007 DRAWN: C.WANG PAGE: 5 OF 6 ERP: 1203007282 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAH7983 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu APBDA3020ESGC DATE: SEP/28/2007 DRAWN: C.WANG PAGE: 6 OF 6 ERP: 1203007282