3.0x2.5mm SURFACE MOUNT LED LAMP Part Number: APBL3025EYC-F01 High Efficiency Red Yellow Features Description z3.0mmx2.5mm SMT LED, 1.4mm THICKNESS. The High Efficiency Red source color devices are made with zLOW POWER CONSUMPTION. Gallium Arsenide Phosphide on Gallium Phosphide Orange zWIDE VIEWING ANGLE. Light Emitting Diode. zIDEAL FOR BACK LIGHT AND INDICATOR. The Yellow source color devices are made with Gallium zVARIOUS COLORS AND LENS TYPES AVAILABLE. Arsenide Phosphide on Gallium Phosphide Yellow Light zINNER LENS TYPE Emitting Diode. zMOISTURE SENSITIVITY LEVEL : LEVEL 3. zPACKAGE : 2000PCS / REEL. zRoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAF1330 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 1 OF 6 ERP: 1203000886 Selection Guide Part No. Dice Lens Type High Efficiency Red (GaAsP/GaP) APBL3025EYC-F01 WATER CLEAR Yellow (GaAsP/GaP) Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 7 20 4 15 2θ1/2 100° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red Yellow λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 627 590 nm IF=20mA High Efficiency Red Yellow 625 588 nm IF=20mA Spectral Line Half-width High Efficiency Red Yellow 45 35 nm IF=20mA C Capacitance High Efficiency Red Yellow 15 20 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red Yellow 2 2.1 2.5 2.5 V IF=20mA IR Reverse Current High Efficiency Red Yellow 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Yellow Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 160 140 mA Reverse Voltage 5 Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C V Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF1330 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 2 OF 6 ERP: 1203000886 APBL3025EYC-F01 High Efficiency Red SPEC NO: DSAF1330 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 3 OF 6 ERP: 1203000886 Yellow SPEC NO: DSAF1330 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 4 OF 6 ERP: 1203000886 APBL3025EYC-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAF1330 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 5 OF 6 ERP: 1203000886 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAF1330 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu APBL3025EYC-F01 DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 6 OF 6 ERP: 1203000886