T-1 3/4 (5mm) BI-COLOR INDICATOR LAMP Part Number: WP59EYC High Efficiency Red Yellow Features Description z UNIFORM LIGHT OUTPUT. The High Efficiency Red source color devices are made with z LOW POWER CONSUMPTION. Gallium Arsenide Phosphide on Gallium Phosphide Orange z 3 LEADS WITH ONE COMMON LEAD. Light Emitting Diode. z I.C. COMPATIBLE. The Yellow source color devices are made with Gallium z LONG LIFE-SOLID STATE RELIABILITY. Arsenide Phosphide on Gallium Phosphide Yellow Light z RoHS COMPLIANT. Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAF2650 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/10/2007 DRAWN: Y.L.LI PAGE: 1 OF 7 ERP: 1101005779 Selection Guide Part No. Dice Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 70 150 18 60 High Efficiency Red (GaAsP/GaP) WP59EYC Viewing Angle [1] 2θ1/2 24° WATER CLEAR Yellow (GaAsP/GaP) Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red Yellow λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 627 590 nm IF=20mA High Efficiency Red Yellow 625 588 nm IF=20mA Spectral Line Half-width High Efficiency Red Yellow 45 35 nm IF=20mA C Capacitance High Efficiency Red Yellow 15 20 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red Yellow 2 2.1 2.5 2.5 V IF=20mA IR Reverse Current High Efficiency Red Yellow 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Yellow Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 160 140 mA Reverse Voltage 5 Operating / Storage Temperature V -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF2650 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/10/2007 DRAWN: Y.L.LI PAGE: 2 OF 7 ERP: 1101005779 WP59EYC High Efficiency Red SPEC NO: DSAF2650 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/10/2007 DRAWN: Y.L.LI PAGE: 3 OF 7 ERP: 1101005779 Yellow SPEC NO: DSAF2650 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/10/2007 DRAWN: Y.L.LI PAGE: 4 OF 7 ERP: 1101005779 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAF2650 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu WP59EYC DATE: MAY/10/2007 DRAWN: Y.L.LI PAGE: 5 OF 7 ERP: 1101005779 SPEC NO: DSAF2650 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/10/2007 DRAWN: Y.L.LI PAGE: 6 OF 7 ERP: 1101005779 SPEC NO: DSAF2650 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/10/2007 DRAWN: Y.L.LI PAGE: 7 OF 7 ERP: 1101005779