3.0mmx1.0mm RIGHT ANGLE SMD CHIP LED LAMP Part Number: APBA3010EYC-F01 High Efficiency Red Yellow Features Description z 3.0mmx1.0mm RIGHT ANGLE SMT LED, 2.0mm The High Efficiency Red source color devices are made with THICKNESS. Gallium Arsenide Phosphide on Gallium Phosphide Orange z LOW POWER CONSUMPTION. Light Emitting Diode. z WIDE VIEWING ANGLE. The Yellow source color devices are made with Gallium z IDEAL FOR BACKLIGHT AND INDICATOR. Arsenide Phosphide on Gallium Phosphide Yellow Light z VARIOUS COLORS AND LENS TYPES AVAILABLE. Emitting Diode. z PACKAGE : 2000PCS / REEL. z MOISTURE SENSITIVITY LEVEL : LEVEL 3. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAF1105 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 1 OF 6 ERP: 1203000797 Selection Guide Part No. Dice Lens Type High Efficiency Red (GaAsP/GaP) APBA3010EYC-F01 Min. Typ. 4 12 2.6 6 WATER CLEAR Yellow (GaAsP/GaP) Viewing Angle [1] Iv (mcd) [2] @ 20mA 2θ1/2 140° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red Yellow λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 627 590 nm IF=20mA High Efficiency Red Yellow 625 588 nm IF=20mA Spectral Line Half-width High Efficiency Red Yellow 45 35 nm IF=20mA C Capacitance High Efficiency Red Yellow 15 20 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red Yellow 2 2.1 2.5 2.5 V IF=20mA IR Reverse Current High Efficiency Red Yellow 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Yellow Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 160 140 mA Reverse Voltage 5 Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C V Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF1105 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 2 OF 6 ERP: 1203000797 APBA3010EYC-F01 High Efficiency Red SPEC NO: DSAF1105 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 3 OF 6 ERP: 1203000797 Yellow SPEC NO: DSAF1105 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 4 OF 6 ERP: 1203000797 APBA3010EYC-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAF1105 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 5 OF 6 ERP: 1203000797 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAF1105 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu APBA3010EYC-F01 DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 6 OF 6 ERP: 1203000797