1.6x1.5mm BI-COLOR SMD CHIP LED LAMP APTB1615SURKSGC-F01 HYPER RED SUPER BRIGHT GREEN Description Features 1.6mmx1.5mm SMT LED, 0.7mm THICKNESS. The Hyper Red source color devices are made with LOW POWER CONSUMPTION. DH InGaAlP on GaAs substrate Light Emitting Diode. WIDE VIEWING ANGLE. The Super Bright Green source color devices are IDEAL FOR BACKLIGHT AND INDICATOR. made with Gallium Phosphide Green Light Emitting VARIOUS COLORS AND LENS TYPES AVAILABLE. Diode. PACKAGE : 2000PCS / REEL. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAF1104 REV NO: V.1 DATE: MAR/19/2005 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203002131-01 Selection Guide Part No. Dice Iv (mcd) @ 20mA Lens Type Min. Typ. 70 150 4 12 HYPER RED (InGaAlP) APTB1615SURKSGC-F01 Viewing Angle WATER CLEAR SUPER BRIGHT GREEN (GaP) 2θ θ1/2 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Hyper Red Super Bright Green λD Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 650 565 nm IF=20mA Hyper Red Super Bright Green 635 568 nm IF=20mA Spectral Line Half-width Hyper Red Super Bright Green 28 30 nm IF=20mA C Capacitance Hyper Red Super Bright Green 35 15 pF VF=0V;f=1MHz VF Forward Voltage Hyper Red Super Bright Green 1.95 2.2 2.5 2.5 V IF=20mA IR Reverse Current All 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Super Bright Green Units Power dissipation 170 105 mW DC Forward Current 30 25 mA Peak Forward Current [1] 185 140 mA Reverse Voltage 5 Operating/Storage Temperature V -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF1104 REV NO: V.1 DATE: MAR/19/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203002131-01 APTB1615SURKSGC-F01 Hyper Red SPEC NO: DSAF1104 REV NO: V.1 DATE: MAR/19/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203002131-01 Super Bright Green SPEC NO: DSAF1104 REV NO: V.1 DATE: MAR/19/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203002131-01 APTB1615SURKSGC-F01 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAF1104 REV NO: V.1 DATE: MAR/19/2005 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203002131-01