8.89mmx19.05mm LED LIGHT BAR KB2685EW HIGH EFFICIENCY RED Features Description OLOW CURRENT OPERATION. The High Efficiency Red source color devices are OUNIFORM LIGHT EMITTING AREA. OEASILY MOUNTED ON P.C. BOARDS. OFLUSH MOUNTABLE. made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. OEXCELLENT ON/OFF CONTRAST. OCAN BE USED WITH PANELS AND LEGEND MOUNTS. ORoHS COMPLIANT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAA7000 REV NO: V.5 DATE: APR/25/2005 PAGE: 1 OF 3 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: S.H.CHEN ERP:1334000145 Selection Guide Part No. Dice KB2685EW Iv (mcd) @ 20mA Lens Type HIGH EFFICIENCY RED (GaAsP/GaP) WHITE DIFFUSED Min. Typ. 10 60 Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red λD Dominant Wavelength ∆λ1/2 Max. Units Test Conditions 627 nm IF=20mA High Efficiency Red 625 nm IF=20mA Spectral Line Half-width High Efficiency Red 45 nm IF=20mA C Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz VF Forward Voltage High Efficiency Red 2.0 2.5 V IF=20mA IR Reverse Current High Efficiency Red 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 160 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 5mm below package base. SPEC NO: DSAA7000 REV NO: V.5 DATE: APR/25/2005 PAGE: 2 OF 3 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: S.H.CHEN ERP:1334000145 High Efficiency Red KB2685EW SPEC NO: DSAA7000 REV NO: V.5 DATE: APR/25/2005 PAGE: 3 OF 3 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: S.H.CHEN ERP:1334000145