T-1 3/4 (5mm) SOLID STATE LAMP L-7114PWC WHITE Features Description ! HIGH EFFICIENCY. The source color devices are made with InGaN on SiC Light ! WHITE Emitting Diode. EMISSION,HIGH LUMINOUS INTENSITY. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: KDA0686 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE: OCT/10/2001 DRAWN: J.X.FU PAGE: 1 OF 3 Optical Characteristics Par t No . Dic e L-7114PWC Iv (m c d ) @ 20 m A L en s Ty p e WHITE (InGaN) WATER CLEAR V i ew i n g An g l e Min . Ty p . 2θ1/2 500 1000 20 ° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er D ev i c e VF Forward Voltage White IR Reverse Current White X Ty p . Max . Un it s Tes t Co n d it io n s 3.6 4.2 V IF=20mA 10 uA V R = 5V pF VF=0V, f =1MHz 0.33 Chromaticity Coordinates White Y C 0.36 Capacitance White 65 Absolute Maximum Ratings at T)=25°°C P ar am e t e r Wh it e Un it s Power dissipation 102 mW DC Forward Current 30 mA Peak Forward Current[1] 150 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C 260°C For 5 Seconds Lead Solder Temperature[2] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 4mm below package base. SPEC NO: KDA0686 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE: OCT/10/2001 DRAWN: J.X.FU PAGE: 2 OF 3 White L-7114PWC SPEC NO: KDA0686 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE: OCT/10/2001 DRAWN: J.X.FU PAGE: 3 OF 3