38mm (1.5 INCH) 8x8 DOT MATRIX DISPLAY Part Number: TBA15-11EGWA High Efficiency Red Green Features Description z 1.5 INCH MATRIX HEIGHT. The High Efficiency Red source color devices are made with z DOT SIZE 3.7mm. Gallium Arsenide Phosphide on Gallium Phosphide Orange z LOW CURRENT OPERATION. Light Emitting Diode. z HIGH CONTRAST AND LIGHT OUTPUT. The Green source color devices are made with Gallium z COMPATIBLE WITH ASCII AND EBCDIC CODES. Phosphide Green Light Emitting Diode. z STACKABLE HORIZONTALLY AND VERTICALLY. z COLUMN CATHODE AND COLUMN ANODE AVAILABLE. z EASY MOUNTING ON P.C. BOARDS OR SOCKETS. z MULTICOLOR AVAILABLE. z MECHANICALLY RUGGED. z STANDARD : GRAY FACE, WHITE DOT. z RoHS COMPLIANT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAD2446 REV NO: V.8 DATE: MAY/26/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1332000258 Selection Guide Part No. Dice Iv (ucd) [1] @ 10mA Lens Type High Efficiency Red (GaAsP/GaP) TBA15-11EGWA Min. Typ. 3000 12500 4700 19500 WHITE DIFFUSED Green (GaP) Description Column Anode Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 627 565 nm IF=20mA High Efficiency Red Green 625 568 nm IF=20mA Spectral Line Half-width High Efficiency Red Green 45 30 nm IF=20mA C Capacitance High Efficiency Red Green 15 15 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red Green 2.0 2.2 2.5 2.5 V IF=20mA IR Reverse Current High Efficiency Red Green 10 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Green Units Power dissipation 75 62.5 mW DC Forward Current 30 25 mA Peak Forward Current [1] 160 140 mA Reverse Voltage 5 Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2] V 260°C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAD2446 REV NO: V.8 DATE: MAY/26/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1332000258 TBA15-11EGWA High Efficiency Red SPEC NO: DSAD2446 REV NO: V.8 DATE: MAY/26/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1332000258 Green SPEC NO: DSAD2446 REV NO: V.8 DATE: MAY/26/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1332000258 PACKING & LABEL SPECIFICATIONS TBA15-11EGWA SPEC NO: DSAD2446 REV NO: V.8 DATE: MAY/26/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1332000258