10 SEGMENT BAR GRAPH ARRAY Part Number: DC3G4Y3EWA Green Yellow High Efficiency Red Features z Suitable for level indicators. Description z Low current operation. The Green source color devices are made with Gallium z Excellent on/off contrast. Phosphide Green Light Emitting Diode. z End stackable. The Yellow source color devices are made with Gallium z Mechanically rugged. z Standard : gray face, white segment. z RoHS compliant. Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAA6881 REV NO: V.3 DATE: FEB/12/2010 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1331000141 Selection Guide Part No. Dice Green (GaP) DC3G4Y3EWA Iv (ucd) [1] @ 10mA Lens Type WHITE DIFFUSED Yellow (GaAsP/GaP) High Efficiency Red (GaAsP/GaP) Min. Typ. 3000 16000 1900 9000 1900 9000 Description 10 Segments Bargraph -Display 3 X Green 4 X Yellow 3 X High Efficiency Red Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Green Yellow High Efficiency Red λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 565 590 627 nm IF=20mA Green Yellow High Efficiency Red 568 588 625 nm IF=20mA Spectral Line Half-width Green Yellow High Efficiency Red 30 35 45 nm IF=20mA C Capacitance Green Yellow High Efficiency Red 15 20 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Green Yellow High Efficiency Red 2.2 2.1 2.0 2.5 2.5 2.5 V IF=20mA IR Reverse Current Green Yellow High Efficiency Red 10 10 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Yellow High Efficiency Red Units 62.5 75 75 mW DC Forward Current 25 30 30 mA Peak Forward Current [1] 140 140 160 mA Power dissipation Reverse Voltage 5 Operating/Storage Temperature Lead Solder Temperature [2] V -40°C To +85°C 260°C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAA6881 REV NO: V.3 DATE: FEB/12/2010 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1331000141 DC3G4Y3EWA Green SPEC NO: DSAA6881 REV NO: V.3 DATE: FEB/12/2010 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1331000141 Yellow SPEC NO: DSAA6881 REV NO: V.3 DATE: FEB/12/2010 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1331000141 High Efficiency Red SPEC NO: DSAA6881 REV NO: V.3 DATE: FEB/12/2010 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1331000141 PACKING & LABEL SPECIFICATIONS DC3G4Y3EWA SPEC NO: DSAA6881 REV NO: V.3 DATE: FEB/12/2010 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1331000141