KINGBRIGHT WP917CK

2x3mm QUAD-LEVEL RECTANGULAR LED
LAMP
Part Number: WP917CK/4EGWT
HIGH EFFICIENCY RED
GREEN
Features
Description
UNIFORM LIGHT OUTPUT.
The High Efficiency Red source color devices are made
SUITABLE FOR LEVEL INDICATOR.
With Gallium Arsenide Phosphide on Gallium Phosphide
LOW POWER CONSUMPTION.
Orange Light Emitting Diode.
I.C. COMPATIBLE.
The Green source color devices are made with Gallium
LONG LIFE - SOLID STATE RELIABILITY.
Phosphide Green Light Emitting Diode.
UL RATING :94V-0.
HOUSING MATERIAL : TYPE 66 NYLON.
RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAF3497
REV NO: V.3
DATE: APR/16/2007
PAGE: 1 OF 5
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: S.J.LIU
ERP:1102002285
Selection Guide
Dice
Part No.
Iv (mcd) [2]
@ 20mA
Lens Type
HIGH EFFICIENCY RED (GaAsP/GaP)
WP917CK/4EGWT
Min.
Typ.
4
10
4
10
Viewing
Angle [1]
2θ1/2
100°
WHITE DIFFUSED
GREEN (GaP)
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2.Luminous Intensity / Luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
High Efficiency Red
Green
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
627
565
nm
IF=20mA
High Efficiency Red
Green
625
568
nm
IF=20mA
Spectral Line Half-width
High Efficiency Red
Green
45
30
nm
IF=20mA
C
Capacitance
High Efficiency Red
Green
15
15
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
High Efficiency Red
Green
2.0
2.2
V
IF=20mA
2.5
2.5
Notes:
1.Forward Voltage: +/-0.1V
2.Wavelength: +/-1nm
Absolute Maximum Ratings at TA=25°C
Parameter
High Efficiency Red
Green
Units
Power dissipation
75
62.5
mW
DC Forward Current
30
25
mA
Peak Forward Current [1]
160
140
mA
Operating/storage Temperature
-40°C To +85°C
Lead Solder Temperature [2]
260°C For 3 Seconds
Lead Solder Temperature [3]
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
SPEC NO: DSAF3497
REV NO: V.3
DATE: APR/16/2007
PAGE: 2 OF 5
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: S.J.LIU
ERP:1102002285
L-937EGW
High Efficiency Red
SPEC NO: DSAF3497
REV NO: V.3
DATE: APR/16/2007
PAGE: 3 OF 5
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: S.J.LIU
ERP:1102002285
Green
SPEC NO: DSAF3497
REV NO: V.3
DATE: APR/16/2007
PAGE: 4 OF 5
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: S.J.LIU
ERP:1102002285
PACKING & LABEL SPECIFICATIONS
WP917CK/4EGWT
SPEC NO: DSAF3497
REV NO: V.3
DATE: APR/16/2007
PAGE: 5 OF 5
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: S.J.LIU
ERP:1102002285