T-1 (3mm) SOLID STATE LAMP WP34AD Features AMBER Description LOW POWER CONSUMPTION. The Amber source color devices are made with Gallium POPULAR T-1 DIAMETER PACKAGE. Arsenide Phosphide on Gallium Phosphide Yellow Light GENERAL PURPOSE LEADS. Emitting Diode. RELIABLE AND RUGGED. LONG LIFE - SOLID STATE RELIABILITY. AVAILABLE ON TAPE AND REEL. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAF2285 REV NO: V.1 DATE: APR/16/2005 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1101003383 Selection Guide Part No. Dice WP34AD Iv (mcd) @ 10mA Lens Type AMBER (GaAsP/GaP) Viewing Angle Min. Typ. 2 θ 1/2 3 12 60° AMBER DIFFUSED Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Amber λD Dominant Wavelength ∆λ1/2 C Typ. Max. Units Test Conditions 590 nm IF=20mA Amber 588 nm IF=20mA Spectral Line Half-width Amber 35 nm IF=20mA Capacitance Amber 20 pF VF=0V;f=1MHz VF Forward Voltage Amber 2.1 2.5 V IF=20mA IR Reverse Current Amber 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Amber Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 140 mA 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF2285 REV NO: V.1 DATE: APR/16/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1101003383 Amber WP34AD SPEC NO: DSAF2285 REV NO: V.1 DATE: APR/16/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1101003383 PACKING & LABEL SPECIFICATIONS WP34AD Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAF2285 REV NO: V.1 DATE: APR/16/2005 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1101003383