T-1 3/4 (5mm) BI-COLOR INDICATOR LAMP WP59EGW/CA Features HIGH EFFICIENCY RED / GREEN Description UNIFORM LIGHT OUTPUT. The High Efficiency Red source color devices are made LOW POWER CONSUMPTION. With Gallium Arsenide Phosphide on Gallium Phosphide 3 LEADS WITH ONE COMMON LEAD. I.C. COMPATIBLE. Orange Light Emitting Diode. The Green source color devices are made with Gallium LONG LIFE - SOLID STATE RELIABILITY. Phosphide Green Light Emitting Diode. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAF2649 REV NO: V.1 DATE: APR/19/2005 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1101005757 Selection Guide Part No. Dice Iv (mcd) @ 20mA Lens Type Min. Typ. 2.6 5 1.6 5 HIGH EFFICIENCY RED (GaAsP/GaP) WP59EGW/CA Viewing Angle 2 θ1/2 60° WHITE DIFFUSED GREEN (GaP) Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Units Test Conditions λpeak Peak Wavelength High Efficiency Red Green 627 565 Max. nm IF=20mA λD Dominant Wavelength High Efficiency Red Green 625 568 nm IF=20mA ∆λ1/2 Spectral Line Half-width High Efficiency Red Green 45 30 nm IF=20mA C Capacitance High Efficiency Red Green 15 15 pF VF=0V;f=1MHz VF Forward Voltage High Efficiency Red Green 2.0 2.2 2.5 2.5 V IF=20mA IR Reverse Current All 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Green Units Power dissipation 105 105 mW DC Forward Current 30 25 mA Peak Forward Current [1] 160 140 mA Reverse Voltage 5 Operating/storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds V Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF2649 REV NO: V.1 DATE: APR/19/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1101005757 High Efficiency Red / Green WP59EGW/CA SPEC NO: DSAF2649 REV NO: V.1 DATE: APR/19/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1101005757 PACKING & LABEL SPECIFICATIONS WP59EGW/CA Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAF2649 REV NO: V.1 DATE: APR/19/2005 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1101005757