SUPER FLUX LED LAMP PRELIMINARY SPEC Part Number: WP7679C1QBC/D Technical Data ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Features: Benefits: * High Luminance output. *Outstanding Material Efficiency. * Design for High Current Operation. * Uniform Color. *Electricity savings. * Low Power Consumption. *Maintenance savings. * Low Thermal Resistance. *Reliable and Rugged. * Low Profile. * Packaged in tubes for use with automatic insertion equipment. Typical Applications: * RoHS Compliant. *Automotive Exterior Lighting. *Electronic Signs and Signals. *Specialty Lighting. SPEC NO: DSAH3826 REV NO: V.1 DATE: MAY/04/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1101017708 Outline Drawings Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. Absolute Maximum Ratings at TA=25°C PARAMETER QB/D UNITS DC Forward Current 30 mA Power dissipation 126 mW Reverse Voltage 5 V Operating Temperature -40 To +85 °C Storage Temperature -40 To +85 °C Lead Solder Temperature[1] 260°C For 5 Seconds 1.1.5mm[0.06inch]below seating plane. SPEC NO: DSAH3826 REV NO: V.1 DATE: MAY/04/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1101017708 Selection Guide Part No. Iv(cd)[1] @30mA LED COLOR WP7679C1QBC/D Blue (AlInGaN) Min. Typ. 0.38 0.9 Viewing Angle[2] 2θ1/2 Typ. 70° Notes: 1.Luminous intensity is measured with an integrating sphere after the device has stabilized; Luminous Intensity / luminous flux: +/-15%. 2.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Optical Characteristics at TA=25°C IF=30mA Rθj-a=200°C/W DEVICE TYPE QB/D PEAK WAVELENGTH λPEAK (nm) TYP. DOMINANT[1] WAVELENGTH λDOM (nm) TYP. SPECTRAL LINE WAVELENGTH Δλ1/2(nm) TYP. 468 470 25 Note: 1.The dominant wavelength is derived from the CIE Chromaticity Diagram and represents the perceived color of the device; Wavelength: +/-1nm. Electrical Characteristics at TA=25°C DEVICE TYPE QB-D FORWARD VOLTAGE [1] VF (VOLTS) @ IF=30mA REVERSE CURRENT IR (uA) @ VR=5V CAPACITANCE C (pF) @ VF=0V F=1MHZ THERMAL RESISTANCE Rθj -pin °C/W TYP. MAX. MAX. TYP. TYP. 3.5 4.2 10 100 180 Note: 1. Forward Voltage: +/-0.1V. SPEC NO: DSAH3826 REV NO: V.1 DATE: MAY/04/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1101017708 Figures SPEC NO: DSAH3826 REV NO: V.1 DATE: MAY/04/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1101017708 PACKING & LABEL SPECIFICATIONS WP7679C1QBC/D SPEC NO: DSAH3826 REV NO: V.1 DATE: MAY/04/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1101017708