KW1-801XY SERIES Multi-Color LED Numeric Display Single Digit (0.80") DESCRIPTION: PACKAGE DIMENSIONS The KW1-801XY series is large multi-color single digit display in 0.80 inch (20.30mm) height designed for accurate readable displays need to be viewed over a distance. This series is suitable for use in instruments, digital readout displays. All devices are available as either common anode or common cathode. 11.60(0.457) o 8 PIN 1. o φ2.5(0.098) 18.60(0.732) ABSOLUTE MAXIMUM RATINGS: (Ta=25 C) Parameter Max Reverse Voltage per segment 5V Reverse Current per segment (Vr = 5V) 100µA Derating Linear from 25oC per segment 0.4mA/ oC Operating Temperature Range -40oC To 85oC Storage Temperature Range -40oC To 100oC Soldering Temperature 1.6mm(1/16") from body for 5 sec. at 260oC 2.54(0.100) 25.00(0.984) 20.30(0.800) + A F 10.60(0.417) 3.0(0118) min. φ0.50(0.020) 15.24(0.600) D INTERNAL CIRCUIT DIAGRAM RED A B C D E F G 2 1 17 16 1312 9 8 6 7 3 4 15 14 NC: 10, 11 A B C D E F G 2 1 17 16 1312 9 8 6 7 3 4 15 14 GREEN 5,18 Test Condition If=20mA If=20mA If=20mA Vr=5V If=10mA RED Unit V nm nm µA µ cd GREEN 5,18 TESTING CONDITION FOR EACH PARAMETER : Symbol Vf λρ ∆λ Ir Iv C E NOTES : 1. All dimensions are in millimeters (inches). 2. Tolerance is +0.25mm(0.010) unless otherwise specified. 3. Specifications are subject to change without notice. 4. NP: No Pin. 5. NC: No Connect. Parameter Forward Voltage Peak Emission Wave Length Spectral Line Half-Width Reverse Current Average Luminous Intensity B G NC: 10, 11 o PART NO. SELECTION AND APPLICATION INFORMATION (RATINGS AT 25 C AMBIENT) Chip Part No. KW1-801A32 KW1-801ASG KW1-801A26 KW1-801C32 KW1-801CSG KW1-801C26 Wave C.C or C.A Electro-optical Data(at 10mA) Absolute Maximum Ratings ∆λ Pd If 635 45 100 50 100 1.7 1.9 2.6 10-20 750 2000 565 30 100 50 100 1.7 2.2 2.6 10-20 750 2000 Common 660 20 100 50 100 1.5 1.9 2.6 10-20 1500 5000 Anode 570 30 100 50 100 1.7 2.2 2.6 10-20 850 2200 Yellow 585 30 100 50 100 1.7 2.2 2.6 10-20 700 1600 GaP Green 565 30 100 50 100 1.7 2.2 2.6 10-20 750 2000 GaAsP/GaP Hi-Eff Red 635 45 100 50 100 1.7 1.9 2.6 10-20 750 2000 GaP Green 565 30 100 50 100 1.7 2.2 2.6 10-20 750 2000 GaAlAs Super Red Common 660 20 100 50 100 1.5 1.9 2.6 10-20 1500 5000 GaP Super Green Cathode 570 30 100 50 100 1.7 2.2 2.6 10-20 850 2200 GaAsP/GaP Yellow 585 30 100 50 100 1.7 2.2 2.6 10-20 700 1600 GaP Green 565 30 100 50 100 1.7 2.2 2.6 10-20 750 2000 Raw Material Emitted Color GaAsP/GaP Bright Red GaP Green GaAlAs Super Red GaP Super Green GaAsP/GaP Length λρ (nm) If If Vf (V) Iv (µcd) (Peak) Per Segment (Rec) Per Segment (nm) (mW) (mA) (mA) Min. Typ. Max. mA Min. Typ. REMARKS : 1. The average luminous intensity is obtained by summing the luminous intensity of each segment and dividing by the total number of segments. 2. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (International Commission on Illumination) eye-response curve. 3. Clean only by pure water, isopropanol, ethanol, Freon TF (or equivalent).