Electric Double Layer Capacitor: BOOSTCAP® Ultracapacitor Round, solder lead type Series: BCAP > Features: > > > > > > > > > > > Applications: > > > > > > Dimensions similar to EN 60086-2 & EN 60285 Over 500,000 duty cycles 10 year life capability Higher energy vs. electrolytic Higher power vs. batteries Aluminum construction Round, double ended design Ultra-low internal resistance Resistant against reverse polarity UL Recognized Automotive subsystems Heavy duty vehicle subsystems Rail system power Windmill pitch control systems Wireless transmissions Dimensions: Dimensions, mm Case Size L OD Weight [g] Vol. [I] Typical package qty. BCAP0350 62 33 60 0.05 40 Product dimensions and specifications may change without notice. Please contact Maxwell Technologies directly for any technical specifications critical to application. Electric Double Layer Capacitor: BOOSTCAP® Ultracapacitor | Doc. # 1006287 | Rev. 6 | Electric Double Layer Capacitor: BOOSTCAP® Ultracapacitor > Specifications: Product Specification BCAP0350 Mounting Tolerance Capacitance, CR [F] 350 Voltage, UR +/- 20% 2.5 Internal resistance, DC [ohm] 0.0032 +/- 25 % Internal resistance, 1 kHz [ohm] Thermal Resistance, R (oC/W) 0.0016 +/- 25 % th Short circuit current, Isc [A] ∆T=DRthIc2Rd 1500 Caution, current possible with short circuit from UR 1 Operating temp. range [C] Discharging at Constant Current (25°C) 10.9 Leakage current [mA] 72 hrs, 25°C -40 to 65 Storage temp. range [C] > Standard Solder -40 to 70 Endurance, Capacitance [F] < 20% decrease Endurance, Resistance [ohm] < 25% increase 1000 hrs @ UR and 65°C Maximum energy, Emax [Wh/kg] 5.1 Peak Power Density, Pd [W/kg] 16,275 Matched Load Power Density, Pd [W/kg] 3,900 See additional technical information Full discharge from UR Life Time ∆C/CR < 20% decrease, ESR < 2 x increase from initial value after 10y @ 25°C Cycle Life ∆C/CR < 20% decrease, ESR < 2 x increase from initial value after 500K cycles @ 25°C (I = 5A) Markings: Capacitors are marked with the following information Rated capacitance, Rated voltage, product number, name of manufacturer, UL symbol, positive terminal, negative terminal and warning marking > Mounting Recommendations: Cells are designed to be soldered into series or parallel strings. Components should not be operated outside recommended limits. Parts can be ordered without tabs. > Additional Technical Information: Pd = (0.12 x E2/Rd)/M ∆T=DRthIc2Rd E = charge voltage (UR) M = capacitor weight (kg) D = duty cycle Rd = internal resistance (DC) V = capacitor volume (l) Ic= continuous current Electric Double Layer Capacitor: BOOSTCAP® Ultracapacitor | Doc. # 1006287 | Rev. 6 | Electric Double Layer Capacitor: BMOD® Ultracapacitor Modules > ∆T - duty cycle vs. operating current: > Curves generated under free convection at 25°C ambient 1.00 ' T = Rth x Duty Cycle x I2 x RDC o Rth = 10.9 C/W RDC = .0032 ohms 0.90 'T = 40 oC 0.80 Duty Cycle 0.70 'T = 30 oC 0.60 0.50 'T = 20 oC 0.40 0.30 'T = 10 oC 0.20 0.10 0.00 0 10 20 30 40 50 60 70 80 90 100 Current (A) 0.06 ' T = Rth x Duty Cycle x I2 x RDC 'T = 40 C 0.05 o 'T = 30 C 0.04 Duty Cycle Rfth = 10.9 oC/W RDC = .0032 ohms o 'T = 20 oC 0.03 0.02 'T = 10 oC 0.01 0.00 100 120 140 160 180 200 220 240 260 280 300 Current (A) Patent Pending Worldwide Headquarters Maxwell Technologies 9244 Balboa Avenue • San Diego, 92123 CA, USA PHONE: +(1) 858 503 3300 FAX: +(1) 858 503 3301 EMAIL: [email protected] European Office Maxwell Technologies SA CH-1728 Rossens • Switzerland PHONE: +41 (0) 26 411 85 00 FAX: +41 (0) 26 411 85 05 EMAIL: [email protected] Electric Double Layer Capacitor: BOOSTCAP® Ultracapacitor www.maxwell.com | Doc. # 1006287 | Rev. 6 |