DATASHEET MC BMOD POWER SERIES 16 V MODULES ® BMOD0110 P016 B01 BMOD0250 P016 B01 BMOD0500 P016 B01 BMOD0500 P016 B02 FEATURES AND BENEFITS • Ultra-low internal resistance • Highest power performance available • Lowest time constant • 16.2 V operating voltage • Over 1,000,000 duty cycles • Individually balanced cells • Voltage and temperature sensor output included • Compact, rugged, fully enclosed splash proof design APPLICATIONS • Transportation • Automotive • Industrial • Uninterruptible Power Supplies (UPS) • Telecommunication PRODUCT SPECIFICATIONS CAPACITANCE Nominal capacitance BMOD0110 BMOD0250 BMOD0500 B01 BMOD0500 B02 110 F 250 F 500 F 500 F 2.4 mΩ 2.4 mΩ 0.5°C/W 0.5°C/W +20% Tolerance capacitance VOLTAGE Rated voltage 16.2 V DC Surge voltage 16.8 V DC Maximum operating voltage 750 V DC Isolation voltage1 2,500 V AC RESISTANCE ESR, DC2 5.4 mΩ 4.1 mΩ Max. Resistance tolerance Thermal resistance (Rth) 1.1°C/W 0.91°C/W TEMPERATURE Operating temperature range -40°C to +65°C Storage temperature range -40°C to +70°C Temperature characteristics ± 5% at 25°C (at -40°C) Capacitance change ± 150% at 25°C (at -40°C) Internal resistance change POWER Pd 2,300 W/kg 1,700 W/kg 2,700 W/kg 2,300 W/kg Pmax 6,000 W/kg 4,400 W/kg 6,700 W/kg 6,700 W/kg 1.49 Wh/kg 2.05 Wh/kg 3.17 Wh/kg 3.17 Wh/kg ENERGY Emax LIFESPAN Endurance After 1,500 hours application of rated voltage at 65°C. Within % of initial specified value. Capacitance change <20% decrease Internal resistance change <60% increase Shelf life After 1,500 hours storage at 65°C without load shall meet specification for endurance. Page 1 • Document number: 1009363.6 DATASHEET MC BMOD POWER SERIES 16 V MODULES ® BMOD0110 P016 B01 BMOD0250 P016 B01 BMOD0500 P016 B01 BMOD0500 P016 B02 Life test After 10 years at rated voltage and 25°C. Within % of initial specified value. Capacitance change 30% decrease Internal resistance 150% increase CYCLES Cycle test Capacitors cycled between specified voltage and half rated voltage under constant current at 25°C (1,000,000). Capacitance change 30% decrease Internal resistance 150% increase Within % of initial specified value. Within % of initial specified value. CURRENT Leakage current BMOD0110 3 Short circuit current (lsc) 4 Maximum continuous current BMOD0250 BMOD0500 B01 BMOD0500 B02 1.5 mA 3.0 mA 5.2 mA 150 mA 3,500 A 3,900 A 4,800 A 4,800 A 30 A 115 A 150 A 150 A 2,000 A 4,000 A 4,000 A VMS Passive 5.75 kg 5.75 kg SAE J2380 SAE J2380 Maximum peak current, 1 sec CONNECTION Screw Terminal MONITORING (IN-BUILT) Balancing5 VMS VMS NTC Thermal monitoring SIZE See drawings Dimensions (L x W x H) (mm) (±0.5mm) Weight 2.7 kg 4.45 kg RATINGS IP65 Humidity resistance Vibration resistance N/A SAE J2380 1 50Hz, 1 min. Maximum string operating voltage 1,500 V DC. Max., room temperature. 3 After 72 hours at 25°C. Initial leakage current can be higher. 4 CAUTION: C urrent possible with short circuit from UR. Do not use as an operating current. 5 VMS = Maxwell Technologies Voltage Management System. 2 MOUNTING RECOMMENDATIONS BMOD0110 modules can be secured at 4 locations at provided holes for M6 bolts. Follow user manual instructions for terminal, balance and output connections. BMOD0250 and BMOD0500 modules can be secured at 8 locations, 4 front face and/or 4 bottom face, at provided holes for M6 bolts. Follow user manual instructions for terminal, balance and output connections. MARKINGS Modules are marked with the following information: Rated capacitance, rated voltage, product number, name of manufacturer, positive and negative terminal, warning marking, serial number. Page 2 • Document number: 1009363.6 DATASHEET MC BMOD POWER SERIES 16 V MODULES ® BMOD0110 P016 B01 BMOD0250 P016 B01 BMOD0500 P016 B01 BMOD0500 P016 B02 DIMENSIONS (mm) Part number L (±0.25mm) W (±0.25mm) H (±0.5mm) s (±0.5mm) 260.1 154.9 79.3 240.0 L (±0.25mm) W (±0.25mm) H (±0.5mm) s (±0.5mm) BMOD0250 P016 B01 416.2 67.2 103.2 53.7 BMOD0500 P016 B01 416.2 67.2 156.7 89.3 BMOD0500 P016 B02 416.2 67.2 156.7 89.3 BMOD0110 P016 B01 Part number Product dimensions are for reference only unless otherwise identified. Product dimensions and specifications may change without notice. Please contact Maxwell Technologies directly for any technical specifications critical to application. Maxwell Technologies, Inc. Worldwide Headquarters 9244 Balboa Avenue San Diego, CA 92123 USA Tel: +1 858 503 3300 US Free Call: +1 877 511 4324 Fax: +1 858 503 3301 Maxwell Technologies SA CH-1728 Rossens Switzerland Tel: +41 (0)26 411 85 00 Fax: +41 (0)26 411 85 05 Maxwell Technologies, GmbH Brucker Strasse 21 D-82205 Gilching Germany T: +49 (0)8105 24 16 10 F: +49 (0)8105 24 16 19 Online: www.maxwell.com • Email: [email protected] Maxwell Technologies, Inc. Shanghai Representative Office Rm.2104, Suncome Liauw’s Plaza 738 Shang Cheng Road, Pudong New Area Shanghai 200120, P.R. China Tel: +86 21 5836 5733 Fax: +86 21 5836 5620 Page 3 • Document number: 1009363.6