MITSUMI Detach Connectors CAM-F96, F97 Connectors OUTLINE 1.17 pins connectors used for attaching and removing between the operation panel and the unit. 2.Misalignment absorption when fitted is ±0.3mm in direction X, ±1.0mm in direction Y and ±0.5mm in direction Z. 3.Supports reflow mounting. 4. The cover and connector pins are linked as a measure against socket contact deformation. The structure is such that when the cover is lowered the contact pin contact portion also lowers a certain amount. (The contact pin exposure outside the cover has been kept to the required minimum to protect the contact pins.) CAM-F96 CAM-F97 HOW TO ORDER 1. CAM-F96 (Plug) 2. CAM-F97 (Socket) F96-017-230-AGGAA F97-017-230-AGGAA 1 2 1 Series No. (F96) 2 No. of contacts (017 : 17pins) 1 2 1 Series No. (F97) 2 No. of contacts (017 : 17pins) MITSUMI Detach Connectors SPECIFICATIONS ELECTRICAL CHARACTERISTICS DC 14V 1A 500V AC 1minute 100MΩ min. (at 500V DC) 70mΩ max. Rated Voltage Rated Current Withstanding Voltage Insulation Resistance Contact Resistance MECHANICAL CHARACTERISTICS 10,000times 7.55N (0.77kgf) max. 5.78±0.49N (0.590±0.05kgf) -30~+85°C Life (Matching Cycle) Total Insertion Force Total Rebound Force Using Temperature Range MATERIAL & FINISH Component parts Housing CAM-F96 Contact Ground pin Housing Contact CAM-F97 Ground pin Cover Material Nylon resin Copper Alloy Copper Alloy Nylon resin Copper Alloy Copper Alloy Nylon resin Brass Finish Black Gold plating Gold plating Black Gold plating Nickel plating Black Nickel plating MITSUMI DIMENSIONS CAM-F96 (Plug) 23 23 2-3.5 1.5 +0.1 0 0.5 +0.1 0 1.1 0.4 P=1.25 17−3.3 +0.1 0 1.5 1.7 7 (4) 2.5 2-ø1.2 1 17-1.25 20 23.7 (Hole pitch) 20 The reference PWB size (TOLERANCE:±0.05) 1 4.1 24.9 2-ø1 ±0.05 4 23.7±0.1 Unit : mm MITSUMI Detach Connectors CAM-F97 (Socket) 35 31 20 (17.5) 23 (Hole pitch) 20 17-2.9 +0.1 0 8-2.5 3 5 1.5 P=2.5 1.25 0.4 31 (Hole pitch) (ø0.8) 12.2 (4.1) 13 ±0.1 2-ø2.4 4-ø1.2 +0.1 0 Y 17.5 The reference PWB size. (TOLERANCE: ±0.05) 2.05 35 27.5 25.6 4.3 (0.7) 1.7 23±0.1 26.4 31±0.1 0.5 2-ø1 ±0.05 1 2-ø1±0.05 17.5 1.5 X P=2.5 17-1.4 7-2.5 Z 3±0.1 5±0.1 Unit : mm