MITSUMI Memory Stick™ Connectors CIM-E31 Series Connectors FEATURES 1. Memory Stick™ connector. 2. Fantastic touch! With push-in push-out eject function. 3. Supports presence or absence of card detection switch. 4. Ideal for portable equipment! Ultra-small, ultra-thin, and only 3.5mm high, with coupled length of 51.8mm. 5. SMT and FPC (FPC is customizable) types are available. 6. Half-lock mechanism prevents card falling out, and full-lock mechanism operates when coupled. * Memory Stick™ is a registered trademark of SONY Corporation. HOW TO ORDER E31-010-21 0-A G K A1 2 3 4 5 6 7 8 9 1. Series No. (E31) 2. No. of contacts (010 : 10pins) 3. Housing material (21 : LCP resin) 4. Housing UL grade (0 : UL94V-0) 5. Contact plating (A : Gold) 6. Contact plating thickness (G : 0.3µm) 7. Contact style (K : FPC, G : Angle SMT) 8. Package (E : Tray) 9. Supplementary symbol SPECIFICATIONS ELECTRICAL CHARACTERISTICS Rated Voltage Rated Current Withstanding Voltage Insulation Resistance Contact Resistance AC 50V (rms) 0.5A 500V AC (rms) 1minute 1000MΩ min. (at 500V DC) Initial: 40mΩ max.; after testing: 80mΩ max. MITSUMI Memory Stick™ Connectors MECHANICAL CHARACTERISTICS 12,000 times 4.9N (0.5kgf)~8.83N (0.9kgf) 4.9N (0.5kgf)~8.83N (0.9kgf) -20~+60°C Life (Matching Cycle) Card Insertion Force Eject Force Using Temperature Range MATERIAL & FINISH FPC Type Component Parts SMT Type Material LCP resin Copper Alloy SUS SUS PPA resin SUS SUS Copper Alloy Copper Alloy SUS SUS PET Housing Contact Plate Half Lock Slider Case Coil Spring Lock Pin Switch A Switch B Lock Spring Guide Plate Insulated Sheet Finish (Black) Gold plating (Black) Gold plating Gold plating - Material LCP resin Copper Alloy SUS SUS PPA resin SUS SUS Copper Alloy Copper Alloy SUS SPTE PET Finish (Black) Gold plating (Black) Gold plating Gold plating Tin plating - DIMENSIONS FPC Type SMT Type 30.2 ±0.2 21.6 ±0.05 12.05 Center of insertion 26.9 +0.1 -0.2 (Connector) 21.6 (Insertion) 12.05 1.4 1.5 26.8 ±0.2 4 ±0.1 1.5 R1 1.4 (0.85) 1.5 2 2 Center of insertion 5 ø1.5 3 ±0.5 25.1±0.5 0 -0.1 36.9 ±0.2 25.4 36.9 ±0.2 2-R1.6 45.8 ±0.2 44.8 ±0.2 2-ø1.6+0.1 0 0.8 3.45±0.05 0.8 Center of connector 1.8 7.5 ±0.1 1.8 0.8 3.45 ±0.05 1.6 ±0.1 The position in closet (2) (5) The position in insertion (51.8) (51.8) (1) (1) Center of connector The position in ejection The position in closet The position in ejection 9.5 (32.5) 26.95 The position in attachment Unit: mm Tolerance: ±0.3 19.2 3.45 Unit: mm Tolerance: ±0.3