Innovations Embedded Board No:BM2P014EVK-001 Confidential c 2013 ROHM Co.,Ltd. All Rights Reserved Reference Board Specification Description Input Symbol Min Voltage Vin 90 Frequency fac 47 Typ 50/60 N Load No L d IInputt Power P Output Voltage Vout 11.4 Current Iout 1.5 Ripple Voltage Vripple Max Unit 264 Vac 63 Hz 50 mW W 12.6 V Vi AC100V/230V Vin：AC100V/230V A 100 80 Condition mV 20MHz Bandwidth % Output：12V 1.5A 4 45mm Efficiency 12 2 Board No:BM2P014EVK-001 90mm Confidential c 2013 ROHM Co.,Ltd. All Rights Reserved Confidential c 2013 ROHM Co.,Ltd. All Rights Reserved 3 5 VCC FB 4 GND 3 NC Drain 7 Board No:BM2P014EVK-001 2 1 Source S Drain 8 Application Schematic Component List Item C1 C2 C3 C5 C6 C7 C8 C10 C12 C15 BR1 D3 D4 D6 F1 IC1 LF1 ZNR1 R3 R4 R5 R6 R7 R8 R11 R12 R13 T1 IC2 PC1 Confidential Spec 47uF/400V 2200pF/500V 0.1uF/X2 10uF/50V 1000pF/16V 2200pF/Y1 100pF/1kV 0.1uF/25V Low-Z 1000uF/25V 0.1uF/25V 800V/1A FRD 650V 0.5A 200V 0.5A FRD 200V 5A 0.39Ω/0.5W 120kΩ/1W 5.1Ω 1.2kΩ 1kΩ 12kΩ 2kΩ 43kΩ 2.7kΩ EI25 4 Board No:BM2P014EVK-001 Parts name 47uF/400V 2200pF/1kV 0.1uF/X2 10uF/50V 1000pF/50V 1608 2200pF/Y1 100pF/1kV 0.1uF/50V 1608 Low-Z 1000uF/25V 0.1uF/50V 1608 UA80 UF4007 RR264M-400 RF601T2D 1.6A/AC250V BM2P014 SS11VL-10062 7D471K MCR25JZHFJR390 120kΩ/1W MCR10EZPJ5R1 MCR10EZPJ122 MCR10EZPJ102 MCR10EZPJ123 MCR10EZPJ202 MCR10EZPJ433 MCR10EZPJ272 YPP1183 TL431 PC817 c 2013 ROHM Co.,Ltd. All Rights Reserved Maker Rohm Rohm Rohm NEC Tokin Rohm Rohm Rohm Rohm Rohm Rohm Rohm Rohm Tomita Transformer:YPP1 Transformer:YPP 1183 (EI25 EI25)) 1 10 NP1 9 2 NP2 3 NP1 8 NS1 NS1 ND NＰ2 NS2 7 4 ND 5 Insulation tape NS1 3 6 Core： Tomita 2G8-EI25 or compatible Bobbin： PIN SHINE INDUSTRIAL P-2513-1 Vertical/Terminal 2 AL-Value： 137.2 nH/N Inductance(1-3pin)： 0.400 ｍH±15% Coil Terminal Turns Wire NP1 ‘1-2 1 2 27 2UEW 00.35 35 NS1 ‘6-9 11 TEX-E 0.5 ND ‘5-4 13 2UEW 0.4 NS2 ‘7-8 11 TEX-E 0.5 NＰ2 ‘2-3 27 2UEW 0.35 Pins 5-5(10pins) or compatible Winding Method 1 Layer FIT（密） Layer FIT（密） 1 Layer SPACE（均等） 1 Layer SPACE（均等） 1 Layer SPACE（均等） 1 Layer FIT（密） Winding beginning：Fix by barrier tape Winding end：Interpose the line drawn i a right in i ht angle l Winding direction：Unification Transformer Specification 5 Measurement Data Vin(V) 90 100 230 264 Confidential Pin(W) 0.033 0.179 1.479 7.174 14.33 21.64 0.032 0.179 1.478 7.165 14.30 21.51 0.036 0.183 1.497 7.272 14.34 21.49 0.045 0.190 1.481 7.240 14.39 21.57 6 Board No:BM2P014EVK-001 Vout(V) 12.09 12.09 12.09 12.09 12.09 12.08 12.09 12.09 12.09 12.09 12.09 12.09 12.09 12.09 12.09 12.09 12.09 12.09 12.09 12.09 12.09 12.09 12.09 12.09 c 2013 ROHM Co.,Ltd. All Rights Reserved Iout(A) 0 0.01 0.1 0.5 1 1.5 0 0.01 0.1 0.5 1 1.5 0 0.01 0.1 0.5 1 1.5 0 0.01 0.1 0.5 1 1.5 Pout(W) 0 0.121 1.209 6.043 12.09 18.13 0 0.121 1.209 6.043 12.09 18.13 0 0.121 1.209 6.044 12.09 18.13 0 0.121 1.209 6.044 12.09 18.13 η(%) 67.5 81.7 84.2 84.3 83.8 67.7 81.8 84.3 84.5 84.3 66.1 80.7 83.1 84.3 84.4 63.6 81.6 83.5 84.0 84.1 Conduction EMI Vin：AC100V/50Hz Vout：12V 1.5A Vin：AC230V/50Hz Vout：12V 1.5A Confidential c 2013 ROHM Co.,Ltd. All Rights Reserved 7 Board No:BM2P014EVK-001 Notice Notes 1) The information contained herein is subject to change without notice. 2) Before you use our Products, please contact our sales representative and verify the latest specifications : 3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. 4) Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. 6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. 7) The Products specified in this document are not designed to be radiation tolerant. 8) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. 9) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. 10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. 11) ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. 12) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. 13) When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. R1102A