NEC UPD61171F1-XYZ-MN2-A

PRELIMINARY PRODUCT LETTER
MOS INTEGRATED CIRCUIT
µPD61171
SECOND GENERATION ENHANCED MULTIMEDIA ARCHITECTURE
PROCESSOR FOR DVD RECORDER/PERSONAL VIDEO RECORDERS
DESCRIPTION
The µPD61171 is a fully-integrated system processor for DVD recorders or personal video recorders (PVR). Based
on NEC Electronics’ second-generation Enhanced Multi Media Architecture (EMMArchitecture), the µPD61171 provides
the functionality required to realize a high-performance and cost-effective DVD recorder or PVR.
FEATURES
•
DVD-Video, DVD-Video Recording compliant
•
DVB, MPEG2-TS/PS and MPEG1 compliant codec
•
DolbyTM digital audio codec, DTSTM audio decoder
•
High performance, dual MIPS32TM CPU core: 225 MIPS at 187 MHz
•
High-bandwidth unified memory controller to support external DDR SDRAM
•
Flexible multi-standard, multi-stream processor
•
Integrated CSS and CPPM decryption
•
Integrated CPRM and DES encryption/decryption
•
Integrated Multi-2 and DVB descrambler
•
Dual storage interfaces for ATA UDMA100-compliant HDD and ATAPI DVD drive
•
Real time VBR/CBR encoding
•
3D noise reduction filter and motion-adaptive de-interlacer
•
7 graphics planes with dual video scalars
•
Simultaneous progressive and interlace video outputs: 6 DACs for YPbPr (or YCbCr or RGB), S-Video (Y/C) and
CVBS output with support for NTSC, PAL and SECAM
•
Multi-channel audio outputs: IEC60958 and PCM with support for up to 8 channels
•
Selectable host bus interface: Generic 16-bit host bus or PCI bus
APPLICATIONS
DVD recorders, personal video recorders, home servers
ORDERING INFORMATION
Part number
Package
Remark
µPD61171F1-XYZ-MN2-A
449-pin plastic BGA (27 × 27)
XYZ: Audio option
“Dolby” and “Dolby Digital” are trademarks of Dolby Laboratories.
To use the µ PD61171, a license from Dolby Laboratories Licensing Corporation is necessary.
The information contained in this document is being issued in advance of the production cycle for the
product. The parameters for the product may change before final production or NEC Electronics
Corporation, at its own discretion, may withdraw the product prior to its production.
Not all products and/or types are availabe in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. S16775EJ1V0PL00 (1st edition)
Date Published June 2003 NS CP (K)
Printed in Japan
2003
µ PD61171
TYPICAL APPLICATION
Key input
Front uCon
LCD
Module
78K/0
Remote Control I/F
CS
Tuner Unit
Stream
Ext. Stream
Input
HDD
Analog
Tuner Unit
16M SDRAM
GR
µPD64031A
3D/YC
µPD64011A
Ext. Video
Input
µPD61171
Audio
ADC
Analog Audio
Input
Digital Audio
Input
Optical Disk
BT.656
Video Output
CVBS, S, D
PCM
Audio
6ch DAC
SPDIF
Receiver
Audio
Output
SPDIF Output
i-Link
PHY
µPD72852A
IEEE1394
µPD72893
BT.656
Memory Card I/F
(Option)
PCM
512 Mbits x 2
16M SDRAM
DDR
DDR
2
Preliminary Product Letter S16775EJ1V0PL
64 MB x 2
Flash
Flash
µ PD61171
FEATURE LIST
High-performance main processor:
High-performance MIPS32 CPU core: 225 Dhrystone MIPS @187 MHz frequency
32-bit RISC MIPS architecture
Supports MIPS32 instruction set
8 KB instruction cache, 8 KB data cache configuration
EJTAG debugging interface
High-performance sub CPU:
High-performance MIPS32 CPU core with DSP features for media processing
8 KB instruction cache, 8 KB data cache configuration
48 KB scratch-pad memory support
Unified memory controller:
Supports 32-bit bus width DDR SDRAM
Supports data rate up to PC266
Unified CPU / MPEG Codec / Graphics memory
Supports 128 M bits, 256 M bits, 512 M bits DDR SDRAM device
Total memory size up to 1 G bits
External memory interface (EMI):
ROM interface
Total address area 64 MB/CS for ROM
Supports normal, page and flash ROM
Supports NOR, NAND and strata flash ROM
2 chip select signals for ROM
General input/output (GIO) interface
Total address area 16 MB for GIO
4 chip select signals for GIO
Supports Intel, Motorola, and 16-bit PC card (PCMCIA) interfaces
MPEG video encode engine:
MPEG2 video [email protected], [email protected] standard and MPEG1 standard
Single-pass VBR, CBR encode control
Supports various picture sizes
Horizontal:
720, 704, 640, 544, 480, 352, 320 pixels/line
Vertical:
480, 240, 576, 288 lines/frame
Pre-analysis: Film detection, scene change detection and motion estimation assist
Supports video
8-bit Y/Cb/Cr 4:2:2 (ITU-R BT.656)
Time base corrector
Embedded 32-bit RISC encode control processor
Audio encode engine:
MPEG1 audio layer 2 standard
LPCM for DVD/D-VHS
Supports sample rate conversion
Dolby Digital consumer encode (family option)
3
Preliminary Product Letter S16775EJ1V0PL
µ PD61171
MPEG stream processor:
MPEG2-PS, MPEG2-TS and MPEG1-System demultiplexing
Supports DVD-Video, DVD-Video recording and VCD
Integrated CSS and CPPM decryption
Integrated CPRM and DES for encryption / decryption
Integrated Multi-2 and DVB descrambler
Multiplex support for format conversion
Demultiplex support
Partial TS generation
Stream interfaces
Two 8-bit parallel ports
Two serial ports
MPEG video decode engine:
MPEG2 video [email protected], [email protected] standard and MPEG1 standard
Supports double decode capability for trick play
JPEG decode accelerator
Audio decode engine:
MPEG1 audio layer 1/2 standard
LPCM for DVD/D-VHS
Dolby Digital 5.1 channel decode (family option)
DTS (family option)
MP3 (family option)
WMA (family option)
Supports virtual surround
Supports mixing of test tone, attenuation
Display/graphics BitBlt engine:
7 graphics planes
256-level alpha blending between all planes
Simultaneous interlace and progressive video output
Motion adaptive 3D-NR and motion adaptive De-interlacer
Clipping functions for OSD
Color space and color depth conversion function
Two independent real-time scalars plus offline scalers for both OSD planes
Sub-picture decoding and scaling functions
Video encoder:
Six 54 MHz 10-bit DACs for analog YPbPr (or YCbCr or RGB), S-Video (Y/C) and CVBS video output.
NTSC, PAL and SECAM standards
Support for L21 data, Teletext, WSS, VBID, and VPS
4
Preliminary Product Letter S16775EJ1V0PL
µ PD61171
External audio/video port:
1 video/stereo audio input port for MPEG2 audio/video encode engine
1 video/stereo audio I/O port for external DV codec device
1 video output port for external video encoder device
Multi-channel output port for audio DAC device
IEC60958 output port
Supported video formats:
ITU-R BT.656
ITU-R BT.1358
PCI interface:
3.3 V 33 MHz 32-bit PCI 2.2
Initiator/Target
2 target windows
Boot across PCI
IDE interface:
Supports two IDE interfaces for up to four IDE drives
UATA100/66/33, bus master IDE and PIO modes
2 IDE I/F Supports
Peripherals:
Supports one MultiMediaCardTM/Secure Digital Memory Card interface
Supports one Memory StickTM interface
Two 16550 UARTs with 16-byte FIFOs
Two asynchronous UARTs
Supports one clocked serial interface (CSI)
Two ISO-7816-compliant SmartCard interfaces
Two I2C-compatible multi-master interfaces
General purpose I/O
Four timers supporting input capture/output compare
Two system timers, an elapse timer, a (volatile) real-time clock and a watch-dog timer
Physical:
Power :
2.5 W (TYP)
Power supply voltage : 3.3 V I/O
2.5 V I/O for DDR SDRAM interface
1.5 V for core logic
Package:
449-pin Plastic BGA (27 × 27 mm)
5
Preliminary Product Letter S16775EJ1V0PL
µ PD61171
1. FUNCTIONAL DESCRIPTION
1.1
Overview
The functionality of the device can be divided into the following areas:
CPU core
MPEG AV encoder
MPEG stream processor
MPEG video decoder
MPEG audio decoder/processor
External A/V input/output
Graphics processor
Video encoder
Miscellaneous interfaces
1.2
Block Diagram
Ext. memory
DDR266
CPU
MIPS32
BT.656
MPEG
AV
Encode
Unified
Memory
Controller
Stream
Processor
CSS/CPRM etc.
µ PD61171
CPU
MIPS32
Video
Encoder
MPEG
Video
Decode
TS
BT.656
AV
switch
1st
ATA
2nd
ATA
Peripheral
HDD
DVD
6
Preliminary Product Letter S16775EJ1V0PL
Display
Controller
&
Scaler
Audio
Processor
480P
480I
BT.656
PCM
SPDIF
µ PD61171
2. PACKAGE DRAWING
449-PIN PLASTIC BGA (27x27)
D
w
D1
4−C2.0
S B
ZE
ZD
B
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
A
E1
E
AE AC AA W U R N L J G E C A
AD AB Y V T P M K H F D B
INDEX MARK
w
25°
S A
A
y1
S
A2
S
y
A1
e
S
φb
φx
M
S AB
ITEM
D
D1
MILLIMETERS
27.00±0.20
24.00
E
27.00±0.20
E1
w
24.00
e
0.30
1.00
A
A1
2.23±0.30
0.50±0.10
A2
b
1.73
0.60±0.10
x
0.15
y
y1
0.15
0.35
ZD
1.50
ZE
1.50
P449F1-100-MN2-1
7
Preliminary Product Letter S16775EJ1V0PL
µ PD61171
Dolby and Dolby Digital are trademarks of Dolby Laboratories Corporation.
MIPS32 and MIPS are trademarks of MIPS Technologies Corporation.
DTS is a trademark of Digital Theater Systems, Inc.
MultiMediaCard is a trademark of Infineon Technologies AG of Germany.
Memory Stick is a trademark of Sony corporation.
The names of other companies and products are trademarks or registered trademarks of each company.
• The information contained in this document is being issued in advance of the production cycle for the
product. The parameters for the product may change before final production or NEC Electronics
Corporation, at its own discretion, may withdraw the product prior to its production.
• No part of this document may be copied or reproduced in any form or by any means without the prior written consent
of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document.
• NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property
rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other
liability arising from the use of such products. No license, express, implied or otherwise, is granted under any
patents, copyrights or other intellectual property rights of NEC Electronics or others.
• Descriptions of circuits, software and other related information in this document are provided for illustrative purposes
in semiconductor product operation and application examples. The incorporation of these circuits, software and
information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC
Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of
these circuits, software and information.
• While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize
risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products,
customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and
anti-failure features.
• NEC Electronics products are classified into the following three quality grades: "Standard", "Special", and "Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-designated
"quality assurance program" for a specific application. The recommended applications of an NEC Electronics
product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC
Electronics products before using it in a particular application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and
visual equipment, home electronic appliances, machine tools, personal electronic equipment and
industrial robots.
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life
support).
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support
systems and medical equipment for life support, etc.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
(1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
(2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
M5 02. 11-1