FRONTIER GP60-10R-LFR

Frontier Electronics Corp.
667 E. COCHRAN STREET, SIMI VALLEY, CA 93065
TEL: (805) 522-9998
FAX: (805) 522-9989
E-mail: [email protected]
Web: http://www.frontierusa.com
6A GENERAL PURPOSE PLASTIC RECTIFIER
GP60-005R-LFR THRU GP60-10R-LFR
FEATURES
z HIGH CURRENT LEAD MOUNTED
z DIFFUSED JUNCTION
z HIGH SURGE CAPABILITY
z LOW FORWARD VOLTAGE DROP
z COMPLETELY INSULATED CASE
z UNIFORM MOLDED BODY
z THE PLASTIC MATERIAL CARRIES U/L RECOGNITION 94V-0
z HIGH TEMPERATURE SOLDERING GUARANTEED: 260°C/10S
/0.375”, (9.5mm) LEAD LENGTH/5 LBS. (2.3KG) TENSION
z BEVEL ROUND CHIP, AVALANCHE OPERATION
z ROHS
1.0(25.4)
MIN
.052(1.3)
.048(1.2)
.360(9.1)
.340(8.6)
.360(9.1)
.340(8.6)
1.0(25.4)
MIN
MECHANICAL DATA
z CASE: MOLDED PLASTIC, P6, DIMENSIONS IN INCHES
AND (MILLIMETERS)
z TERMINAL: AXIAL LEADS, SOLDERABLE PER MIL-STD-202,
METHOD 208
z POLARITY: COLOR BAND DENOTES CATHODE
z MOUNTING POSITION: ANY
z WEIGHT : 2.1 GRAMS
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED
SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20%
RATINGS
MAXIMUM RECURRENT PEAK REVERSE VOLTAGE
MAXIMUM RMS VOLTAGE
MAXIMUM DC BLOCKING VOLTAGE
MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT
0.375”(9.5mm) LEAD LENGTH AT TA=55°C
PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF
SINE-WAVE SUPERIMPOSED ON RATED LOAD
TYPICAL JUNCTION CAPACITANCE (NOTE 1)
TYPICAL THERMAL RESISTANCE (NOTE 2)
STORAGE TEMPERATURE RANGE
OPERATING TEMPERATURE RANGE
SYMBOL
VRRM
VRMS
VDC
GP60-005R GP60-01R GP60-02R GP60-04R GP60-06R GP60-08R GP60-10R
UNITS
-LFR
-LFR
-LFR
-LFR
-LFR
-LFR
-LFR
50
35
50
100
70
100
200
140
200
400
280
400
600
420
600
800
560
800
1000
700
1000
V
V
V
IO
6.0
A
IFSM
400
A
CJ
150
PF
Rθja
TSTG
TOP
10
°C /W
- 55 TO + 175
- 55 TO + 175
°C
°C
ELECTRICAL CHARACTERISTICS (AT TA =25°C UNLESS OTHERWISE NOTED)
CHARACTERISTICS
SYMBOL
GP60-005R GP60-01R GP60-02R GP60-04R GP60-06R GP60-08R GP60-10R
UNITS
-LFR
-LFR
-LFR
-LFR
-LFR
-LFR
-LFR
MAXIMUM FORWARD VOLTAGE AT IO DC
VF
1.0
V
MAXIMUM REVERSE CURRENT AT 25℃
IR
5
μA
MAXIMUM REVERSE CURRENT AT100℃
IR
50
μA
NOTE:
1. MEASURED AT 1MHZ AND APPLIED REVERSE VOLTAGE OF 4.0 VOLTS
2. BOTH LEADS ATTACHED TO HEAT SINK 70×70×1t(mm) COPPER PLATE AT LEAD LENGTH 5mm
GP60-005R-LFR THRU GP60-10R-LFR
Page: 1
RATINGS AND CHARACTERISTIC CURVE GP60-005R-LFR THRU GP60-10R-LFR
FIG.2-MAXIMUM FORWARD CURRENT DERATING
CURVE
6.0
60 HZ RESISTIVE OR
INDUCTIVE LOADS
AVERAGE FORWARD
CURRENT AMPERES
5.0
GROUND PLANE
1〞X 1〞COPPER
4.0
SURFACE AREA
3.0
2.0
RECOMMENDED
PC BOARD
MOUNTING
PC
BOARD
AVERAGE FORWARD
CURRENT AMPERES
FIG.1-MAXIMUM FORWARD CURRENT DERATING
CURRENT
25
L=.25〞(6.35mm)
20
15
L=.375〞(9.5mm)
10
L=.625〞(15.8mm)
5
1.0
STANDARD PC
BOARD MOUNTING
0
0
20
40
60
0 20
80 100 120 140 160 180
40 60
FIG.4-TYPICAL REVERSE CHARACTERISTICS
FIG.3-TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTIC
100
INSTANTANEOUS FORWARD CURRENT
AMPERES
1000
100
TJ=25℃
PULSE WIDTH=300us
1% DUTY CYCLE
10
1.0
0.1
.6
.8
1.0
1.2
1.4
1.6
1.8
TJ=100℃
1.0
TJ=25℃
0.1
.01
20
FIG.5-MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
8.3 ms SINGLE HALF SINE-WAVE
JEDEC METHOD
500
TJ=25℃
400
300
200
TJ=150℃
100
0
1
10
40
60
80
100
120
PERCENT OF RATED PEAK REVERSE VOLTAGE
100
TRANSIENT THERMAL IMPEDANCE,
o
C / WATT
PEAK FORWARD SURGE CURRENT
AMPERES
10
2.0
INSTANTANEOUS FORWARD VOLTAGE
VOLTS
600
80 100 120 140 160
LEAD TEMPERATURE℃
AMBIENT TEMPERATURE ℃
INSTANTANEOUS FORWARD CURRENT
MICROAMPERES
RESISTIVE OR INDUCTIVE
LOAD 60 HZ BOTH LEADS
ATTACHED TO HEAT SINKS
WITH LENGTHS AS SHOWN
L=.125〞(3.18mm)
FIG.6-TYPICAL TRANSIENT THERMAL IMPEDANCE
100
10
1
0.1
0.01
0.1
1
10
NUMBER OF CYCLES AT 60 HZ
t, PULSE DURATION, sec.
GP60-005R-LFR THRU GP60-10R-LFR
Page: 2
100