Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: [email protected] Web: http://www.frontierusa.com 1A SUPER FAST RECOVERY RECTIFIER SF10-005 THRU SF10-06 FEATURES z LOW FORWARD VOLTAGE z HIGH SURGE CAPABILITY z SUPER FAST SWITCHING SPEED z GOOD FOR SWITCHING MODE CIRCUIT 1.0(25.4) MIN .034(0.9) .028(0.7) .205(5.2) .166(4.2) MECHANICAL DATA z CASE:MOLDED PLASTIC, .107(2.7) .080(2.0) DO41, DIMENSIONS IN INCHES AND (MILLIMETERS) z EPOXY:UL 94V-0 FLAME RETARDANT PLASTIC CASE z LEADS:AXIAL LEADS, SOLDERABLE PER MIL-STD-202, METHOD 208 z MOUNTING POSITION:ANY z WEIGHT:0.34 GRAMS 1.0(25.4) MIN MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20% SF10 SF10 SF10 SF10 SF10 SF10 SF10 SF10 UNITS RATINGS SYMBOL -005 -01 -015 -02 -03 -04 -05 -06 MAXIMUM RECURRENT PEAK REVERSE VOLTAGE VRRM 50 100 150 200 300 400 500 600 V MAXIMUM RMS VOLTAGE VRMS 35 70 105 140 210 280 350 420 V MAXIMUM DC BLOCKING VOLTAGE VDC 50 100 150 200 300 400 500 600 V MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT 1.0 A IO .375〞(9.5mm) LEAD LENGTH AT TA=55°C PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF SINE-WAVE SUPERIMPOSED ON RATED LOAD TYPICAL JUNCTION CAPACITANCE (NOTE 1) TYPICAL THERMAL RESISTANCE (NOTE 2) Rθja 50 ℃/W STORAGE TEMPERATURE RANGE TSTG - 55 TO + 150 ℃ OPERATING TEMPERATURE RANGE TOP - 55 TO + 150 ℃ IFSM CJ ELECTRICAL CHARACTERISTICS (AT TA =25°C UNLESS OTHERWISE NOTED) SF10 CHARACTERISTICS SYMBOL -005 MAXIMUM FORWARD VOLTAGE AT IO DC VF IR MAXIMUM REVERSE CURRENT AT 25℃ MAXIMUM REVERSE CURRENT AT100℃ IR MAXIMUM REVERSE RECOVERY TIME (NOTE 3) TRR NOTE : 1. MEASURED AT 1 MHZ AND APPLIED REVERSE VOLTAGE 0F 4.0 VOLTS 30 A 15 SF10 SF10 -01 -015 0.95 10 SF10 -02 SF10 SF10 -03 -04 1.25 PF SF10 SF10 -05 -06 1.85 10 V μA 100 μA 35 nS 2. BOTH LEADS ATTATCHED TO HEATSINK 20×20×1t(mm) COPPER PLATE AT LEAD LENTH 5mm 3. REVERSE RECOVERY TEST CONDITIONS: IF=0.5A, IR=1.0A, IRR=0.25A SF10-005 THRU SF10-06 UNITS Page: 1 RATINGS AND CHARACTERISTIC CURVE SF10-005 THRU SF10-06 FIG. 1-TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC 50Ω NONINDUCTIVE FIG. 2-TYPICAL FORWARD Trr 100Ω NONINDUCTIVE CURRENT DERATING CURVE 2.0 D.U.T. PULSE GENERATOR ( NOTE 2 ) (+) 25 Vdc (approx) -0.25A 1Ω NON INDUCTIVE (-) 0 OSCILLOSCOPE ( NOTE 1 ) (+) Single Phase Half Wave 60 Hz Resistive or Inductive Load 1.0 CURRENT (A) AVERAGE FORWARD +0.5A (-) 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE (oC) 1cm NOTE: 1. RISETIME=7ns MAX. INPUT IMPEDANCE=1 MEGOHM 22PF 2. RISE TIME =10ns MAX. SOURCE IMPEDANCE=50OHMS SET TIME BASE FOR 10/20 ns/cm FIG. 4-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1000 10 INSTANTANEOUS FORWARD CURRENT INSTANTANEOUS REVERSE CURENT (uA) FIG. 3-TYPICAL REVERSE CHARACTERISTICS 100 10 1.0 TJ=25oC 0.1 0 20 40 60 80 100 120 SF10-005~10-02 SF10-03~10-04 1.0 .1 .01 SF10-06 .001 140 0 .2 .4 .6 .8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE (V) PERCENT OF RATED PEAK REVERSE VOLTAGE (%) FIG. 5-MAXIMUN NON-REPETITIVE FIG. 6-TYPICAL JUNCTION CAPACITANCE FORWARD SURGE CURRENT 200 40 100 Wave (JEDEC Method) JUNCTION CAPACITANCE (pF) PEAK FORWARD SURGE CURRENT (A) 8.3 ms Single Half Sine 30 25 20 15 10 5 40 TJ=25oC SF10-005~10-02 20 10 6 4 SF10-03~10-06 2 1 0 1 5 10 20 50 NUMBER OF CYCLES AT 60 Hz SF10-005 THRU SF10-06 100 .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE (V) Page: 2