PRODUCT DATA SHEET Part Number: C8028 Revision Level: 09 Date: 1C 20 SBC FMPE OA BS, 2C 18 AWG BC PVC, SIAMESE FR-PVC JKT 05/14/2012 RG 59/U Type Coaxial & 2/C 18 AWG Siamese CCTV - Cable A. CONSTRUCTION A DIAMETERS 1) CONDUCTOR: #20 AWG Solid Bare Copper 0.032” nom. 2) 3) INSULATION: BRAID SHIELD: 0.056” Wall Foamed Polyethylene Bare Copper Braid (95% Coverage) 0.144” nom. 0.172” nom. B. 1) 2) CONSTRUCTION B CONDUCTOR: INSULATION: #18 AWG 7/.0152 Bare Copper 0.010” Wall Polyvinyl Chloride 0.046” nom. 0.066” nom. 3) PAIR: 2 Conductors twisted LHL (Black, Red) 0.132” nom. C. 1) FINAL CABLE JACKET: 0.032” Wall FR- Polyvinyl Chloride 2) PRINT LEGEND: D. INDUSTRY APPROVALS Major dim: 0.460” Nom Minor dim: (coax) 0.236” Nom Minor dim: (pair) 0.196” Nom CAROL (R) -- C8028 -- RG 59/U TYPE COAX – 1C 20 AWG + 2C 18 AWG CL2 (ETL) OR CM c(ETL)us 75C 3084997 — MADE IN USA (MFG CODE; MM/YY & TRU-MARK SEQ. FT. MKGS) UL Standards 13 National Electric Code Type CL2 (ETL) Article 725 UL & CSA Standards 444 National Electric Code EU 2002/95/EC Type CM c(ETL)us Article 800 RoHS Compliant E. ELECTRICAL PROPERTIES 1) 2) 3) 4) 5) 6) 7) 8) 9) TEMPERATURE: SUGGESTED WORKING VOLTAGE (Vrms): CONDUCTOR D.C. RESISTANCE A: CONDUCTOR D.C. RESISTANCE B: SHIELD RESISTANCE A: CAPACITANCE A: CAPACITANCE B: (Conductor – Conductor) CHARACTERISTIC IMPEDANCE A: ATTENUATION (A): -20C to +75C 300V MAX 10.10 Ohms/1000 ft. nom. @ 20 C 6.65 Ohms/1000 ft. nom. @ 20 C 3.0 Ohms/1000 ft. nom. @ 20 C 16.2 pF/ft. @ 1 kHz nom. 18.0 pF/ft. @ 1kHz nom. 75 Ohms @ 1 MHz nom. FREQ. (MHz) dB/100 ft. 1 10 50 100 200 360 500 1000 0.23 0.76 1.69 2.45 3.59 4.94 6.06 9.15 Note: Data are subject to change without notice. Contact your Customer Service representative for latest information. Page 1 of 2 Rev.1 – Old Manchester specs Rev 2: :– 03/12/-2009 / AMT Rev. 3: revise diameter from .146 to .144, shield DCR from 2.0 to 3.0 , DCR; and print legend from CM to CL2, CATV, CM // GT ( February 25, 2010) Rev. 4: remove CATV from print legend / GT (03/15/10) Rev. 5: correct spelling attention to attenuation; remove dimensions from drawing adjust o/a dia from 460x242 to 440x.238 / GT (04/09/10) Rev. 6: correct Mutual Cap (B) from 45.0 pf/ft to 18.0 Pf/ft per actual test data ( 17.33 pf/ft) and remove Impedance value for (B); remove jacket color black – GT- 04/21/2010 Rev. 7: Revise ins dia from .144 to .146, remove BS AWG add date and seq FT to print legend – GT 07/21/2010 Rev. 8: revise final dia to Nom. GT Rev. 9: revise spec from UL to ETL, Remove AWM GT/ 5/14/12 Page 2 of 2