SINGLE PHASE HALF WAVECURVE 1 =–50 FORWARD RS1A-RS1G RS1J-SR1M CURRENT 25°C f4= 1 MHz TEMPERATURE (℃) 1FIG. 25TJAMBIENT 75 10 100 20DERATING 125 15060Hz 100 175 FIG. –2MAXIMUM 10 2SINGLE 5NON10 0.0 0.2 0.4 0.6 0.8 HYESD2025S Bi-Directional Transient Voltage Suppressing Diode HYESD2025S is a Bi-Directional transient suppressing diode to protection one power line, one control line, or one low speed data line from overvoltage hazard of Electrostatic Discharge ( ESD ), Electrical Fast Transients ( EFT ) and Lightning. The typical application are computer interfaces protection, control signal lines protection etc.. FEATURES APPLICATION • Bi-Directional TVS • Computer interfaces protection • Provides ESD protection to IEC61000-4-2 level 4 • Serial / parallel ports protection - + 15KV Air Discharge • Control signal lines protection - + 8KV Contact Discharge • Power lines protection • Latchup protection • Fast response speed • Low clamping voltage • Low operation voltage MECHANICAL INFORMATION • Case : SOD-523 Package • Pb-Free, Halogen Free, RoHS/WEEE Complian HYESD2025S SOD-523 PIN CONFIGURATION 1 2 REV. 0.9, 16-May-2012 HYESD2025S Maximum Rating and Thermal Characteristics ( TC=25℃ ) Parameter Symbol Value Unit Peak Pulse Power (8/20μs) PPP 200 W Peak Pulse Current (8/20μs) IPP 8.5 A ESD per IEC 61000-4-2(Air) VESD +15KV V ESD per IEC 61000-4-2(Contact) VESD +8KV V Operating Temperature Range TOP -55 to +125 ℃ Storage Temperature Range TSTO -55 to +150 ℃ Lead Soldering Temperature ( 10sec. ) TSOL 260 ℃ Electrical Characteristics ( TC=25℃, unless otherwise noted ) Parameter Reverse Working Voltage Reverse Breakdown Voltage Symbol Test Condition VRWM T=25°C VBR IBR =1mA; T=25°C Min Typ Max Unit - - 5.0 V 6.0 - 9.0 V Reverse Leakage Current IR VRWM =5V, T=25°C; I/O pin to GND - - 2.5 uA Positive Clamping Voltage VC IPP=5A, tP=8/20us; T=25°C - 7.0 8.2 V Negative Clamping Voltage VC IPP=8.5A, tP=8/20us; T=25°C - 13.5 18.6 V ESD Holding Voltage Vhold IEC61000-4-2 6KV T=25°C, Contact mode - 10.5 - V Channel Input Capacitance Between Channel CIN VR=0V, f=1MHz; T=25°C - 13.5 15 pF REV. 0.9, 16-May-2012 RATING AND CHARACTERISTIC CURVES HYESD2025S Typical Characteristic Curves ( TJ=25℃, UNLESS OTHERWISE NOTED ) FIG.2 - Pulse Waveform FIG.1 - Power Derating Curve 20 Percentage of IPP Percentage of Power Peak Value IRSM@8us 100 18 16 14 12 10 80 60 40 Half Value IRSM/2@20us 20 8 0 6 4 5 6 7 8 9 0 10 5 10 20 25 30 Time (us) Ambient Temperature (℃) FIG.4 - Clamping Voltage vs. Peak Pulse Current FIG.3 - Junction Capacitance vs. Reverse Voltage 20 20 16 Clamping Voltage (V) CJ, Junction Capacitance (pF) 15 12 8 4 15 10 5 Waveform tr=8us, td=20us F=1MHz 0 0 -5 -4 -3 -2 -1 0 1 2 Reverse Voltage - VR (V) 3 4 5 4 5 6 7 8 9 10 Peak Pulse Current (A) REV. 1, 05-May-2012 HYESD2025S Order & Marking Information Part Number Package Marking Packing Q'ty HYESD2025S SOD-523 25S 7" Reel 3K Package Outline Dimension SOD-523 Package REV. 1, 05-May-2012