TLP627X TLP627 HIGH VOLTAGE DARLINGTON OUTPUT OPTICALLY COUPLED ISOLATOR 'X' SPECIFICATIONAPPROVALS VDE 0884 in 3 available lead forms : - STD - G form - SMD approved to CECC 00802 7.0 6.0 z DESCRIPTION The TLP627 is an optically coupled isolator consisting of infrared light emitting diode and a high voltage NPN silicon photo darlington which has an integral base-emitter resistor to optimise switching speed and elevated temperature characteristics in a standard 4 pin dual in line plastic package. FEATURES z Options :10mm lead spread - add G after part no. Surface mount - add SM after part no. Tape&reel - add SMT&R after part no. z High Isolation Voltage (5.3kVRMS ,7.5kVPK ) z High Current Transfer Ratio ( 1000% min) z High BVCEO (300V min.) z Low input current 1mA IF APPLICATIONS z Modems z Copiers, facsimiles z Numerical control machines z Signal transmission between systems of different potentials and impedances OPTION G 7.62 OPTION SM SURFACE MOUNT Dimensions in mm 2.54 APPROVALS z UL recognised, File No. E91231 1 4 2 3 1.2 5.08 4.08 7.62 4.0 3.0 3.0 0.5 3.35 10.46 9.86 1.25 0.75 0.26 ABSOLUTE MAXIMUM RATINGS (25°C unless otherwise specified) Storage Temperature -55°C to + 125°C Operating Temperature -30°C to + 100°C Lead Soldering Temperature (1/16 inch (1.6mm) from case for 10 secs) 260°C INPUT DIODE Forward Current Reverse Voltage Power Dissipation 50mA 6V 70mW OUTPUT TRANSISTOR Collector-emitter Voltage BVCEO Collector Current IC Power Dissipation 300V 150mA 150mW POWER DISSIPATION Total Power Dissipation 0.6 0.1 13° Max 0.5 200mW 0.26 10.16 ISOCOM COMPONENTS LTD Unit 25B, Park View Road West, Park View Industrial Estate, Brenda Road Hartlepool, TS25 1YD England Tel: (01429)863609 Fax : (01429) 863581 e-mail [email protected] http://www.isocom.com 26/11/09 DB92651m-AAS/A3 ELECTRICAL CHARACTERISTICS ( TA= 25°C Unless otherwise noted ) PARAMETER Input MIN TYP MAX UNITS Forward Voltage (VF) 1.0 1.15 Reverse Current (IR) Output V IF = 10mA 10 μA VR = 4V 300 V IC = 0.1mA Emitter-collector Breakdown (BVECO ) 0.3 V IE = 0.1mA 200 nA VCE = 200V 1.2 1.0 % % V V 1mA IF , 1V VCE 10mA IF , 1V VCE 10mA IF , 100mA IC 1mA IF , 10mA IC 1 VRMS VPK Ω pF See note 1 See note 1 VIO = 500V (note 1) V = 0, f =1MHz μs μs VCC = 10V, IC= 10mA, RL = 100Ω 10 Current Transfer Ratio (CTR) Saturated CTR (CTRSAT) Collector-emitter SaturationVoltageVCE(SAT) Collector-emitter SaturationVoltageVCE(SAT) 1000 500 Input to Output Isolation Voltage VISO 5300 7500 5x1010 Input-output Isolation Resistance RISO Input-output Capacitance Cf Output Rise Time Output Fall Time Note 1 Note 2 1.3 Collector-emitter Breakdown (BVCEO ) Collector-emitter Dark Current (ICEO ) Coupled TEST CONDITION tr tf 4000 40 15 Measured with input leads shorted together and output leads shorted together. Special Selections are available on request. Please consult the factory. FIGURE 1 VCC Input ton toff 100Ω tr Input 26/11/09 IC = 10mA Output Output tf 10% 10% 90% 90% DB92651m-AAS/A3