LBA127 Dual Single-Pole, Combination OptoMOS® Relay INTEGRATED CIRCUITS DIVISION Parameter Blocking Voltage Load Current On-Resistance (max) Ratings 250 200 10 Units VP mArms / mADC Features • 3750Vrms Input/Output Isolation • Low Drive Power Requirements (TTL/CMOS Compatible) • High Reliability • Arc-Free With No Snubbing Circuits • FCC Compatible • VDE Compatible • No EMI/RFI Generation • Small 8-Pin Package • Machine Insertable, Wave Solderable • Surface Mount, Tape & Reel Version Available Description LBA127 is a combination device comprising one normally open (1-Form-A) and one normally closed (1-Form-B) solid state relay. Both relays are independent, 250V, 200mA, 10 devices designed to provide an ideal solution where a complementary relay pair (1-Form-A / 1-Form-B) is required. Approvals • UL Recognized Component: File E76270 • CSA Certified Component: Certificate 1175739 • EN/IEC 60950-1 Certified Component: TUV Certificate B 09 07 49410 004 Ordering Information Applications • Telecommunications • Telecom Switching • Tip/Ring Circuits • Modem Switching (Laptop, Notebook, Pocket Size) • Hook Switch • Dial Pulsing • Ground Start • Ringing Injection • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment-Patient/Equipment Isolation • Security • Aerospace • Industrial Controls Part # LBA127 LBA127P LBA127PTR LBA127S LBA127STR Description 8-Pin DIP (50/Tube) 8-Pin Flatpack (50/Tube) 8-Pin Flatpack (1000/Reel) 8-Pin Surface Mount (50/Tube) 8-Pin Surface Mount (1000/Reel) Pin Configuration + Control - Normally Closed – Control - Normally Closed + Control - Normally Open – Control - Normally Open 1 8 2 7 3 6 4 5 Switching Characteristics of Normally Open (Form A) Devices Switching Characteristics of Normally Closed (Form B) Devices IF IF ILOAD 90% ILOAD ton DS-LBA127-R12 Normally Open Pole Form-B Form-A Pb Normally Closed Pole 90% 10% 10% toff toff ton e3 www.ixysic.com 1 INTEGRATED CIRCUITS DIVISION LBA127 Absolute Maximum Ratings @ 25°C Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 2 Ratings 250 5 50 1 150 800 3750 -40 to +85 -40 to +125 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Units VP V mA A mW mW Vrms °C °C Derate linearly 1.33 mW / °C Derate linearly 6.67 mW / °C Electrical Characteristics @ 25°C Parameter Output Characteristics Load Current Continuous 1 Peak On-Resistance 2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current to Activate Input Control Current to Deactivate Input Voltage Drop Reverse Input Current Common Characteristics Input to Output Capacitance 2 Conditions Symbol Min Typ Max Units t = 10ms IL=200mA VL=250VP IL ILPK RON ILEAK - 6.8 - 200 ±400 10 1 mArms / mADC mAP VL=50V, f=1MHz ton toff COUT - 110 5 5 - IL=200mA IF=5mA VR=5V IF IF VF IR 0.4 0.9 - 0.7 1.2 - 5 1.4 10 mA mA V A - CI/O - 3 - pF IF=5mA, VL=10V 1 If both poles operate simultaneously, then the load current must be derated so as not to exceed the package power dissipation value. 2 Measurement taken within 1 second of on-time. www.ixysic.com A ms pF R12 INTEGRATED CIRCUITS DIVISION LBA127 Form-A/Form-B PERFORMANCE DATA @25ºC (Unless Otherwise Noted)* 25 25 20 15 10 5 20 15 10 5 20 15 10 0 0 1.18 1.20 1.22 1.24 5 0 0.35 1.26 0.40 0.45 0.50 0.55 0.60 332 334 336 338 340 342 LED Forward Voltage Drop (V) LED Current (mA) Blocking Voltage (VP) Typical LED Forward Voltage Drop vs. Temperature Typical IF for Switch Operation vs. Temperature (IL=100mADC) Typical Blocking Voltage vs. Temperature (Form-A: IF=0mA, Form-B: IF=5mA) 0.65 1.6 IF=50mA IF=20mA IF=10mA 1.5 1.4 1.3 1.2 IF=5mA 0.60 0.55 0.50 1.1 0.45 1.0 -40 0.40 -40 0 20 40 60 Temperature (ºC) Load Current (mA) 250 80 100 -20 0 20 40 60 Temperature (ºC) Load Current vs. Load Temperature (Form-A: IF=5mA, Form-B: IF=0mA) 100 340 335 330 325 320 315 -40 -20 0 20 40 60 80 100 Temperature (ºC) Energy Rating Curve 1.0 200 150 100 50 0.8 0.6 0.4 0.2 0 -40 80 345 1.2 Load Current (A) -20 355 350 LED Current (mA) LED Forward Voltage Drop (V) 25 Device Count (N) Device Count (N) Device Count (N) 30 Typical Blocking Voltage Distribution (Form-A: IF=0mA, Form-B: IF=5mA) (N=50) Typical IF for Switch Operation (N=50, IL=200mADC) Blocking Voltage (VP) 35 Typical LED Forward Voltage Drop (N=50, IF=5mA) -20 0 20 40 60 Temperature (ºC) 80 100 0 10Ps 100Ps 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R12 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION LBA127 Form-A RELAY PERFORMANCE DATA @25ºC (Unless Otherwise Noted)* Form-A Typical Turn-On Time (N=50, IF=5mA, IL=200mADC) 25 15 10 5 0 20 15 10 5 0.33 0.36 0.39 0.42 0.45 0.12 0.13 Turn-On Time (ms) Form-A Typical Turn-On Time vs. Temperature (IF=5mA, IL=100mADC) 1.2 0.14 0.15 0.16 Turn-Off Time (ms) 0.4 0.2 -40 -20 0 20 40 60 Temperature (ºC) 80 100 Form-A Typical Turn-On Time vs. LED Forward Current (IL=100mADC) 1.00 5 6.75 6.80 6.85 6.90 6.95 Form-A Typical On-Resistance vs. Temperature (IF=5mA, IL=100mADC) 8.5 8.0 0.16 0.14 0.12 0.10 7.5 7.0 6.5 6.0 5.5 0.08 -40 0 10 On-Resistance (:) On-Resistance (:) Turn-Off Time (ms) 0.6 15 6.70 0.18 0.8 20 0.17 Form-A Typical Turn-Off Time vs. Temperature (IF=5mA, IL=100mADC) 0.20 1.0 Form-A Typical On-Resistance Distribution (N=50, IF=5mA, IL=200mADC) 0 0 0.30 Turn-On Time (ms) 25 Device Count (N) 20 Device Count (N) Device Count (N) 25 Form-A Typical Turn-Off Time (N=50, IF=5mA, IL=200mADC) -20 0 20 40 60 Temperature (ºC) 80 5.0 -40 100 Form-A Typical Turn-Off Time vs. LED Forward Current (IL=100mADC) 0.165 0.20 -20 0 20 40 60 Temperature (ºC) 80 100 Form-A Typical Load Current vs. Load Voltage (IF=5mA) 0.50 0.25 Load Current (A) Turn-Off Time (ms) Turn-On Time (ms) 0.15 0.75 0.160 0.155 0.10 0.05 0.00 -0.05 -0.10 -0.15 0.150 0 0 10 20 30 40 LED Forward Current (mA) 50 0 10 20 30 40 LED Forward Current (mA) 50 -0.20 -1.5 -1.0 -0.5 0.0 0.5 Load Voltage (V) 1.0 1.5 Form-A Typical Leakage vs.Temperature (Measured Across Pins 5 & 6) (VL=250V) 0.025 Leakage (PA) 0.020 0.015 0.010 0.005 0.000 -40 -20 0 20 40 60 Temperature (ºC) 80 100 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.ixysic.com R12 INTEGRATED CIRCUITS DIVISION LBA127 Form-B RELAY PERFORMANCE DATA @25ºC (Unless Otherwise Noted)* Form-B Typical Turn-On Time (N=50, IF=5mA, IL=200mADC) 25 15 10 5 20 15 10 5 15 10 5 0.05 0.20 0.07 0.09 0.11 0 0.75 0.13 1.25 1.75 2.25 2.75 3.25 4.05 4.95 5.25 5.55 On-Resistance (:) Form-B Typical Turn-On Time vs. Temperature (IF=5mA, IL=100mADC) Form-B Typical Turn-Off Time vs. Temperature (IL=100mADC) Form-B Typical On-Resistance vs. Temperature (IF=0mA, IL=100mADC) 3.5 Turn-Off Time (ms) 3.0 0.10 0.05 2.5 9 IF=5mA 8 IF=10mA 7 IF=20mA 2.0 1.5 1.0 0.5 -20 78.5 4.65 Turn-Off Time (ms) 0.15 0 -40 4.35 Turn-On Time (ms) On-Resistance (:) 0.03 Form-B Typical On-Resistance Distribution (N=50, IF=0mA, IL=200mADC) 20 0 0 Turn-On Time (ms) 25 Device Count (N) 20 Device Count (N) Device Count (N) 25 Form-B Typical Turn-Off Time (N=50, IF=5mA, IL=200mADC) 0 20 40 60 80 5 4 3 2 1 0 -40 100 6 -20 0 20 40 80 60 0 -40 100 -20 0 20 40 60 80 100 Temperature (ºC) Temperature (ºC) Temperature (ºC) Form-B Typical Turn-On Time vs. LED Forward Current (IL=100mADC) Form-B Typical Turn-Off Time vs. LED Forward Current (IL=100mADC) Form-B Typical Load Current vs. Load Voltage (IF=0mA) 2.5 200 77.5 77.0 76.5 2.0 Load Current (mA) Turn-Off Time (ms) Turn-On Time (Ps) 150 78.0 1.5 1.0 0.5 100 50 0 -50 -100 -150 0 76.0 0 5 10 15 20 25 30 35 40 45 -200 0 50 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) LED Forward Current (mA) 0.06 -1 -0.8 -0.6 -0.4 -0.2 0 0.2 0.4 0.6 0.8 1 Load Voltage (V) Form-B Typical Leakage vs. Temperature Measured Across Pins 7&8 (IF=5mA) Leakage (PA) 0.05 0.04 0.03 0.02 0.01 0 -40 -20 0 20 40 60 Temperature (ºC) 80 100 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R12 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION LBA127 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating LBA127 / LBA127S / LBA127P MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time LBA127 / LBA127S 250ºC for 30 seconds LBA127P 260ºC for 30 seconds Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb 6 e3 www.ixysic.com R12 INTEGRATED CIRCUITS DIVISION LBA127 MECHANICAL DIMENSIONS LBA127 2.540 ± 0.127 (0.100 ± 0.005) 9.652 ± 0.381 (0.380 ± 0.015) 8-0.800 DIA. (8-0.031 DIA.) 2.540 ± 0.127 (0.100 ± 0.005) 9.144 ± 0.508 (0.360 ± 0.020) 6.350 ± 0.127 (0.250 ± 0.005) Pin 1 PCB Hole Pattern 7.620 ± 0.254 (0.300 ± 0.010) 6.350 ± 0.127 (0.250 ± 0.005) 3.302 ± 0.051 (0.130 ± 0.002) 0.457 ± 0.076 (0.018 ± 0.003) 7.620 ± 0.127 (0.300 ± 0.005) 7.239 TYP. (0.285) 4.064 TYP (0.160) 7.620 ± 0.127 (0.300 ± 0.005) 0.254 ± 0.0127 (0.010 ± 0.0005) Dimensions mm (inches) 0.813 ± 0.102 (0.032 ± 0.004) LBA127S 9.652 ± 0.381 (0.380 ± 0.015) 2.540 ± 0.127 (0.100 ± 0.005) 6.350 ± 0.127 (0.250 ± 0.005) Pin 1 0.635 ± 0.127 (0.025 ± 0.005) 3.302 ± 0.051 (0.130 ± 0.002) 9.525 ± 0.254 (0.375 ± 0.010) 0.457 ± 0.076 (0.018 ± 0.003) PCB Land Pattern 2.54 (0.10) 8.90 (0.3503) 1.65 (0.0649) 7.620 ± 0.254 (0.300 ± 0.010) 0.254 ± 0.0127 (0.010 ± 0.0005) 0.65 (0.0255) 4.445 ± 0.127 (0.175 ± 0.005) Dimensions mm (inches) 0.813 ± 0.102 (0.032 ± 0.004) LBA127P 2.540 ± 0.127 (0.100 ± 0.005) 6.350 ± 0.127 (0.250 ± 0.005) 0 MIN / 0.102 MAX (0 MIN / 0.004 MAX) 9.398 ± 0.127 (0.370 ± 0.005) Pin 1 9.652 ± 0.381 (0.380 ± 0.015) 7.620 ± 0.254 (0.300 ± 0.010) 2.286 MAX. (0.090 MAX.) 2.54 (0.10) 0.635 ± 0.127 (0.025 ± 0.005) 0.203 ± 0.013 (0.008 ± 0.0005) 8.70 (0.3425) 1.55 (0.0610) 0.65 (0.0255) 2.159 ± 0.025 (0.085 ± 0.001) 0.457 ± 0.076 (0.018 ± 0.003) 0.864 ± 0.120 (0.034 ± 0.004) R12 PCB Land Pattern Dimensions mm (inches) www.ixysic.com 7 INTEGRATED CIRCUITS DIVISION LBA127 MECHANICAL DIMENSIONS LBA127STR Tape & Reel 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) W=16.00 (0.63) Bo=10.30 (0.406) K0 =4.90 (0.193) Ao=10.30 (0.406) P=12.00 (0.472) K1 =4.20 (0.165) Embossed Carrier Embossment User Direction of Feed Dimensions mm (inches) NOTES: 1. Dimensions carry tolerances of EIA Standard 481-2 2. Tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2 LBA127PTR Tape & Reel 2.00 (0.079) 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) Embossment W = 16.00 (0.63) 7.50 (0.295) Bo = 10.30 (0.406) K0 = 2.70 (0.106) K1 = 2.00 (0.079) Embossed Carrier 4.00 (0.157) P = 12.00 (0.472) User Direction of Feed Ao = 10.30 (0.406) Dimensions mm (inches) NOTES: 1. All dimensions carry tolerances of EIA Standard 481-2 2. The tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2 For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. 8 Specification: DS-LBA127-R12 ©Copyright 2012, IXYS Integrated Circuits Division OptoMOS® is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 12/22/2012