LBA716 Dual Single-Pole OptoMOS® Relays Normally Open & Normally Closed INTEGRATED CIRCUITS DIVISION Parameter Load Voltage Load Current On-Resistance (max) Rating 60 1 0.4 Units V Arms / ADC Description LBA716 is a 60V, 1A, 0.4 dual Solid State Relay integrating independent normally open (1-Form-A) and normally closed (1-Form-B) relays into a single package. It features a superior combination of low on-resistance and enhanced peak load current (5A max.) handling capability. Features • 3750Vrms Input/Output Isolation • Low Drive Power Requirements (TTL/CMOS Compatible) • Arc-Free With No Snubbing Circuits • No EMI/RFI Generation • Small 8-Pin Package • Machine Insertable, Wave Solderable • Surface Mount Version • Tape & Reel available Approvals • UL Recognized Component: File # E76270 • CSA Certified Component: Certificate # 1175739 • EN/IEC 60950-1 Certified Component TUV Certificate B 09 07 49410 004 Ordering Information Part # LBA716 LBA716S LBA716STR Applications • Telecommunications • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Utility Meters (gas, oil, electric and water) • Medical Equipment-Patient/Equipment Isolation • Security • Aerospace • Industrial Controls Description 8-Pin DIP (50/Tube) 8-Pin Surface Mount (50/Tube) 8-Pin Surface Mount (1000/Reel) Switching Characteristics of Normally Open Devices Form-A IF 90% 10% ILOAD ton toff Pin Configuration + Control - Normally Closed – Control - Normally Closed + Control - Normally Open – Control - Normally Open 1 8 2 7 3 6 4 5 Switching Characteristics of Normally Closed Devices Normally Closed Form-B Normally Open IF ILOAD 90% 10% toff Pb DS-LBA716-R03 ton e3 www.ixysic.com 1 INTEGRATED CIRCUITS DIVISION LBA716 Absolute Maximum Ratings @ 25ºC Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Derate linearly 1.33 mW / ºC 2 Derate linearly 6.67 mW / ºC Ratings 60 5 50 1 Units VP V mA A 150 800 3750 -40 to +85 -40 to +125 mW mW Vrms °C °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Electrical Characteristics @ 25ºC Parameter Characteristics: Form-A (Normally Open) Load Current Conditions Continuous Peak t < 10ms On-Resistance IL=1A Off-State Leakage Current VL=60V Output Capacitance 50V, f=1MHz Switching Speeds Turn-On IF=5mA, VL=10V Turn-Off Input Control Current to Activate IL=1A Input Control Current to Deactivate Characteristics: Form-B (Normally Closed) Load Current Continuous Peak t < 10ms On-Resistance IL=0.5A Off-State Leakage Current VL=60V, IF=5mA Output Capacitance IF=5mA, 50V, f=1MHz Switching Speeds Turn-On IF=5mA, VL=10V Turn-Off Input Control Current to Activate Input Control Current to Deactivate IL=0.5A Common Characteristics: Form-A and Form-B Input Voltage Drop IF=5mA Reverse Input Current VR=5V Capacitance, Input to Output - Symbol Min Typ Max Units IL - - 1 Arms / ADC ILPK RON ILEAK COUT - 0.21 105 ±5 0.4 1 - AP A pF ton toff IF IF 0.1 0.7 0.09 - 5 5 2 - mA mA IL - - 0.5 Arms / ADC ILPK RON ILEAK COUT - 1.63 280 ±1.2 2 1 - AP A pF ton toff IF IF 0.1 0.58 0.76 - 5 5 2 - mA mA VF IR CI/O 0.9 - 1.2 3 1.4 10 - V A pF ms ms *NOTE: If both poles operate simultaneously, then load current must be derated so as not to exceed the package power dissipation value. 2 www.ixysic.com R03 INTEGRATED CIRCUITS DIVISION LBA716 Form-A RELAY PERFORMANCE DATA @25ºC (Unless Otherwise Noted)* 25 15 10 5 15 10 5 0.69 0.73 0.77 0.81 LED Forward Current (mA) 0.95 10 5 Form-A Typical Turn-On Time vs. LED Forward Current (IL=100mA) 0 20 40 60 Temperature (ºC) 80 600 400 Turn-Off Time (Ps) 2.0 1.5 1.0 0.5 -40 IF=5mA -20 0 20 40 60 Temperature (ºC) 90 100 77.4 77.3 0 50 Form-A Typical Turn-Off Time vs. Temperature (IL=100mA) 80 IF=5mA 75 70 IF=2mA 65 60 55 80 77.5 77.1 10 20 30 40 LED Forward Current (mA) 85 IF=2mA 77.6 77.2 0 Form-A Typical Turn-On Time vs. Temperature (IL=100mA) 68.0 77.7 800 100 66.0 66.5 67.0 67.5 Blocking Voltage (VP) Form-A Typical Turn-Off Time vs. LED Forward Current (IL=100mA) 77.8 0 -20 5 65.5 200 0.70 -40 10 0.211 Turn-Off Time (Ps) Turn-On Time (Ps) 0.75 15 0 0.207 0.208 0.209 0.210 On-Resistance (:) 1000 0.80 0.102 20 15 1200 0.85 0.082 0.087 0.092 0.097 Turn-Off Time (ms) Form-A Typical Blocking Voltage (N=50) 20 0.206 0.90 5 0.077 Form-A Typical On-Resistance (N=50, IF=5mA, IL=1A) 0.85 Form-A Typical IF for Switch Operation vs. Temperature (IL=200mA) 10 0.77 0 0.65 15 0 0.61 0.65 0.69 0.73 Turn-On Time (ms) 25 Device Count (N) Device Count (N) 5 0.57 0 LED Current (mA) 10 1.225 1.230 1.235 1.240 1.245 LED Forward Voltage Drop (V) Form-A Typical IF for Switch Operation (N=50, IL=200mA) 20 Turn-On Time (ms) 15 Device Count (N) 1.220 2.5 20 0 0 Form-A Typical Turn-Off Time (N=50, IF=5mA, IL=100mA) 20 Device Count (N) Device Count (N) Device Count (N) 25 20 Form-A Typical Turn-On Time (N=50, IF=5mA, IL=100mA) 50 -40 -20 0 20 40 60 Temperature (ºC) 0.26 AC On-Resistance (:) 30 Form-A Typical LED Forward Voltage Drop (N=50, IF=5mA) 80 100 10 20 30 40 LED Forward Current (mA) 50 Form-A Typical On-Resistance (AC) vs. Temperature (IL=500mA, IF=5mA) 0.24 0.22 0.20 0.18 0.16 0.14 0.12 -40 -20 0 20 40 60 Temperature (ºC) 80 100 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R03 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION LBA716 Form-A RELAY PERFORMANCE DATA @25ºC (Unless Otherwise Noted)* 1.0 Form-A Maximum Load Current vs. Temperature (IF=5mA) Form-A Typical Load Current vs. Load Voltage (IF=5mA) -0.5 Blocking Voltage (VP) Load Current (A) Current (A) 0.0 0.8 0.6 0.4 0.2 0.0 -1.0 -0.20 -0.15 -0.10 -0.05 0.00 0.05 0.10 0.15 0.20 Voltage (V) -40 -20 0 20 40 60 Temperature (ºC) Form-A Typical Leakage vs. Temperature Measured Across Pins 5 & 6 (VL=60V) 80 69 68 67 66 65 64 63 62 -40 100 -20 0 20 40 60 Temperature (ºC) 80 100 Form-A Energy Rating Curve 6 5 15 Load Current (A) Leakage Current (nA) 20 70 1.2 1.0 0.5 Form-A Typical Blocking Voltage vs. Temperature 10 5 4 3 2 1 0 -40 -20 0 20 40 60 Temperature (ºC) 80 100 0 10Ps 100Ps 1ms 10ms 100ms Time 1s 10s 100s Form-B RELAY PERFORMANCE DATA @25ºC (Unless Otherwise Noted)* 30 Form-B Typical LED Forward Voltage Drop (N=50, IF=5mA) Form-B Typical Turn-On Time (N=50, IF=5mA, IL=100mA) 20 25 15 10 Device Count (N) Device Count (N) Device Count (N) 25 20 15 10 5 5 Form-B Typical IF for Switch Operation (N=50, IL=200mA) 20 15 10 5 0 0.16 0.17 0.18 0.19 0.20 LED Forward Current (mA) 0.21 0.530 0.553 0.576 0.599 Turn-On Time (ms) 15 10 5 0.63 0.622 Form-B Typical On-Resistance (N=50, IF=0mA, IL=5mA) 20 Device Count (N) Device Count (N) 25 0.507 1.225 1.230 1.235 1.240 1.245 LED Forward Voltage Drop (V) 15 10 5 0 0.67 0.71 0.75 0.79 Turn-Off Time (ms) 0.83 Form-B Typical Blocking Voltage (N=50, IF=5mA) 20 Device Count (N) 1.220 20 0 0 0 Form-B Typical Turn-Off Time (N=50, IF=5mA, IL=100mA) 15 10 5 0 1.49 1.53 1.57 1.61 1.65 On-Resistance (:) 1.69 75 76 77 78 79 Blocking Voltage (VP) 80 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.ixysic.com R03 INTEGRATED CIRCUITS DIVISION LBA716 Form-B RELAY PERFORMANCE DATA @25ºC (Unless Otherwise Noted)* Form-B Typical IF for Switch Operation vs. Temperature (IL=100mA) 0.40 423 0.25 0.20 0.15 -20 800 0 20 40 60 80 420 419 Temperature (ºC) 10 20 30 40 LED Forward Current (mA) Form-B Typical Turn-On Time vs. Temperature (IL=100mA) Form-B Typical Turn-Off Time vs. Temperature (IL=100mA) 0 4.5 400 IF=2mA 300 IF=5mA 200 IF=2mA 3.0 2.5 2.0 1.5 IF=5mA 20 40 60 Temperature (ºC) 80 100 -40 Form-B Typical Load Voltage vs. Load Current (IF=0mA) -20 0 20 40 60 Temperature (ºC) 80 Load Current (A) 0.0 -0.2 0.4 0.3 0.2 -0.4 0.1 -0.6 -1.0 -0.8 -0.5 -0.3 0.0 0.3 Voltage (V) 0.0 0.8 1.0 -40 -20 0 20 40 60 Temperature (ºC) Form-B Typical Leakage vs.Temperature Measured Across Pins 7&8 (IF=5mA, VL=60V) 50 1.5 1.4 1.3 -20 80 100 0 20 40 60 Temperature (ºC) 80 100 Form-B Typical Blocking Voltage vs. Temperature (IF=5mA) 92 90 88 86 84 82 80 -40 -20 0 20 40 60 Temperature (ºC) 80 100 1.5 300 1.3 250 200 150 100 1.1 0.9 0.7 0.5 50 0 -40 40 Form-B Energy Rating Curve Load Current (A) Leakage Current (nA) 350 0.5 30 1.6 94 0.5 0.2 20 Form-B Typical On-Resistance vs. Temperature (IF=0mA, IL=100mA) 1.1 -40 100 Form-B Maximum Load Current vs. Temperature (IF=0mA) 0.6 0.4 10 1.2 Blocking Voltage (VP) 0 0 1.7 0.5 -20 0.5 1.8 3.5 1.0 100 -40 1.0 LED Forward Current (ma) On-Resistance (:) Turn-Off Time (ms) 500 1.5 50 4.0 600 2.0 0 417 100 700 Turn-On Time (Ps) 421 418 0.10 -40 Current (A) Turn-Off Time (ms) 0.30 Form-B Typical Turn-Off Time vs. LED Forward Current (IL=100mA) 2.5 422 Turn-On Time (Ps) LED Current (mA) 0.35 0.6 Form-B Typical Turn-On Time vs. LED Forward Current (IL=100mA) -20 0 20 40 60 Temperature (ºC) 80 100 0.3 10Ps 100Ps 1ms 10ms 100ms Time 1s 10s 100s *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R03 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION LBA716 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating LBA716 / LBA716S MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time LBA716 / LBA716S 250ºC for 30 seconds Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb 6 e3 www.ixysic.com R03 INTEGRATED CIRCUITS DIVISION LBA716 Mechanical Dimensions LBA716 2.540 ± 0.127 (0.100 ± 0.005) 9.652 ± 0.381 (0.380 ± 0.015) 8-0.800 DIA. (8-0.031 DIA.) 2.540 ± 0.127 (0.100 ± 0.005) 9.144 ± 0.508 (0.360 ± 0.020) 6.350 ± 0.127 (0.250 ± 0.005) Pin 1 PCB Hole Pattern 7.620 ± 0.254 (0.300 ± 0.010) 6.350 ± 0.127 (0.250 ± 0.005) 0.457 ± 0.076 (0.018 ± 0.003) 3.302 ± 0.051 (0.130 ± 0.002) 7.620 ± 0.127 (0.300 ± 0.005) 7.239 TYP. (0.285) 4.064 TYP (0.160) 0.254 ± 0.0127 (0.010 ± 0.0005) 7.620 ± 0.127 (0.300 ± 0.005) Dimensions mm (inches) 0.813 ± 0.102 (0.032 ± 0.004) LBA716S 9.652 ± 0.381 (0.380 ± 0.015) 2.540 ± 0.127 (0.100 ± 0.005) 6.350 ± 0.127 (0.250 ± 0.005) Pin 1 0.635 ± 0.127 (0.025 ± 0.005) 3.302 ± 0.051 (0.130 ± 0.002) 9.525 ± 0.254 (0.375 ± 0.010) 0.457 ± 0.076 (0.018 ± 0.003) PCB Land Pattern 2.54 (0.10) 8.90 (0.3503) 1.65 (0.0649) 7.620 ± 0.254 (0.300 ± 0.010) 0.254 ± 0.0127 (0.010 ± 0.0005) 0.65 (0.0255) 4.445 ± 0.127 (0.175 ± 0.005) Dimensions mm (inches) 0.813 ± 0.102 (0.032 ± 0.004) R03 www.ixysic.com 7 INTEGRATED CIRCUITS DIVISION LBA716 LBA716STR Tape & Reel 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) K0 =4.90 (0.193) K1 =4.20 (0.165) Embossed Carrier Embossment W=16.00 (0.63) Bo=10.30 (0.406) Ao=10.30 (0.406) P=12.00 (0.472) User Direction of Feed Dimensions mm (inches) NOTES: 1. Dimensions carry tolerances of EIA Standard 481-2 2. Tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2 For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. 8 Specification: DS-LBA716-R03 ©Copyright 2012, IXYS Integrated Circuits Division OptoMOS® is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 12/22/2012