OAA160

OAA160
250V Dual Normally-Open Single-Pole
8-Pin OptoMOS® Relay
INTEGRATED CIRCUITS DIVISION
Parameter
Load Voltage
Load Current
On-Resistance (max)
Rating
250
50
100
Units
V
mArms / mADC

Features
• Fast Switching Times: 0.125ms
• Low Off-State Leakage Current: 25nA
• 3750Vrms Input/Output Isolation
• Low Drive Power Requirements
• High Reliability
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation
• Small 8-Pin Package
• Machine Insertable, Wave Solderable
• Surface Mount, Tape & Reel Versions Available
Applications
• Telecommunications
• Telecom Switching
• Tip/Ring Circuits
• Modem Switching (Laptop, Notebook, Pocket
Size)
• Hook Switch
• Dial Pulsing
• Ground Start
• Ringing Injection
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment-Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls
Description
OAA160 is a 250V, 50mA, 100 dual normally-open
(1-Form-A) relay. This high performance Solid State
Relay provides one of the fastest (0.125ms)
switching times available for two independent
1-Form-A relays in a single package.
Approvals
• UL Recognized Component: File E76270
• CSA Certified Component: File #043639
• EN/IEC 60950-1 Certified Component:
TUV Certificate B 13 12 82667 003
Ordering Information
Part #
OAA160
OAA160P
OAA160PTR
OAA160S
OAA160STR
Description
8-Pin DIP (50/tube)
8-Pin Flatpack (50/tube)
8-Pin Flatpack (1000/Reel)
8-Pin Surface Mount (50/tube)
8-Pin Surface Mount (1000/Reel)
Pin Configuration
+ Control - Pole #1
– Control - Pole #1
+ Control - Pole #2
– Control - Pole #2
AC/DC Configuration
1
8
2
7
3
6
4
5
Normally Open - Pole #1
Normally Open - Pole #2
Switching Characteristics
of Normally-Open Devices
Form-A
IF
90%
10%
ILOAD
ton
DS-OAA160-R09
www.ixysic.com
toff
1
INTEGRATED CIRCUITS DIVISION
OAA160
Absolute Maximum Ratings @ 25ºC
Parameter
Blocking Voltage
Reverse Input Voltage
Input Control Current
Peak (10ms)
Input Power Dissipation 1
Total Power Dissipation 2
Isolation Voltage, Input to Output
Operational Temperature
Storage Temperature
1
Derate linearly 1.33 mW / ºC
2
Derate linearly 6.67 mW / ºC
Ratings
250
5
50
1
150
800
3750
-40 to +85
-40 to +125
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to the
device. Functional operation of the device at conditions beyond
those indicated in the operational sections of this data sheet is
not implied.
Units
VP
V
mA
A
mW
mW
Vrms
°C
°C
Typical values are characteristic of the device at +25°C, and
are the result of engineering evaluations. They are provided for
information purposes only, and are not part of the manufacturing
testing requirements.
Electrical Characteristics @ 25ºC
Parameter
Output Characteristics
Load Current *
AC/DC Configuration, Continuous
Peak
On-Resistance, AC/DC Configuration
Off-State Leakage Current
Switching Speeds
Turn-On
Turn-Off
Turn-On
Turn-Off
Output Capacitance
Input Characteristics
Input Control Current to Activate
Input Control Current to Deactivate
Input Voltage Drop
Reverse Input Current
Common Characteristics
Input to Output Capacitance
Conditions
Symbol
Min
Typ
Max
Units
t=10ms
IL=50mA
VL=250VP
IL
ILPK
RON
ILEAK
-
50
-
50
±100
100
0.025
mArms / mADC
mAP

A
IF=0mA, VL=50V, f=1MHz
ton
toff
ton
toff
COUT
0.020
-
5
0.125
0.125
0.150
0.055
-
ms
ms
ms
ms
pF
IL=50mA
IF=10mA
VR=5V
IF
IF
VF
IR
0.4
0.9
-
0.7
1.2
-
3
1.4
10
mA
mA
V
A
IF=10mA, VL=10V
IF=4mA, VL=10V
VIO=0V, f=1MHz
CIO
3
*NOTE: If both poles operate simultaneously, then load current must be derated in order not to exceed the package power dissipation value.
2
www.ixysic.com
pF
R09
INTEGRATED CIRCUITS DIVISION
OAA160
PERFORMANCE DATA @25ºC (Unless Otherwise Noted)*
30
20
15
10
Device Count (N)
25
20
15
10
5
5
0
0
1.17
25
1.19
1.21
1.23
Typical Turn-Off Time
(N=50, IF=10mA, IL=50mADC)
25
25
Device Count (N)
Device Count (N)
30
20
15
10
5
0
1.25
0.05
0.07
0.09
0.11
0.13
0.012
0.15
0.017
0.022
0.027
0.032
0.037
LED Forward Voltage Drop (V)
Turn-On Time (ms)
Turn-Off Time (ms)
Typical IF for Switch Operation
(N=50, IL=50mADC)
Typical IF for Switch Dropout
(N=50, IL=50mADC)
Typical On-Resistance Distribution
(N=50, IF=10mA, IL=50mADC)
25
20
Device Count (N)
Device Count (N)
Typical Turn-On Time
(N=50, IF=10mA, IL=50mADC)
15
10
5
0
35
30
20
Device Count (N)
35
Typical LED Forward Voltage Drop
(N=50, IF=10mA)
15
10
5
2.075
2.525
2.975
3.425
20
15
10
5
0
1.625
25
0
3.875
1.625
2.075
LED Current (mA)
2.525
2.975
3.425
3.875
42.5
43.5
LED Current (mA)
44.5
45.5
46.5
47.5
On-Resistance (:)
Typical Blocking Voltage Distribution
(N=50)
35
Device Count (N)
30
25
20
15
10
5
0
367.5
374.5
381.5
388.5
395.5
402.5
Blocking Voltage (VP)
Typical Turn-On Time
vs. LED Forward Current
(IL=50mADC)
1.8
0.18
Typical Turn-Off Time
vs. LED Forward Current
(IL=50mADC)
0.040
0.16
1.4
IF=50mA
IF=30mA
IF=20mA
IF=10mA
IF=5mA
1.2
1.0
0.14
Turn-Off Time (ms)
1.6
Turn-On Time (ms)
LED Forward Voltage Drop (V)
Typical LED Forward Voltage Drop
vs. Temperature
0.12
0.10
0.08
0.06
0.04
0
20
40
60
Temperature (ºC)
80
100
0.025
0.020
0.015
0
-20
0.030
0.02
0.8
-40
0.035
120
0
5
10
15
20
25
30
35
40
LED Forward Current (mA)
45
50
0
5
10
15
20
25
30
35
40
45
50
LED Forward Current (mA)
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
R09
www.ixysic.com
3
INTEGRATED CIRCUITS DIVISION
OAA160
PERFORMANCE DATA @25ºC (Unless Otherwise Noted)*
1.25
Turn-Off Time (ms)
1.00
0.75
IF=10mA
0.50
IF=20mA
0.25
0
-40
Load Current (mA)
0
20
40
60
80
100
70
60
50
40
30
20
10
-20
0
20
40
60
80
0
100
-40
-20
0
20
40
60
Temperature (ºC)
Temperature (ºC)
Typical IF for Switch Operation
vs. Temperature
(IL=50mADC)
Typical IF for Switch Dropout
vs. Temperature
Typical Load Current
vs. Load Voltage
(IF=10mA)
-20
0
20
40
60
80
100
Load Current (mA)
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
-40
-20
0
20
40
60
80
-3
100
-2
-1
0
1
100
2
3
Temperature (ºC)
Load Voltage (V)
Maximum Load Current
vs. Temperature
Typical Blocking Voltage
vs. Temperature
Typical Leakage vs. Temperature
Measured across Pins 5&6 or 7&8
IF=30mA
IF=20mA
IF=10mA
400
0.014
395
0.012
390
0.010
385
380
375
0
20
40
60
80
100
120
-40
Temperature (ºC)
0.008
0.006
0.004
0.002
370
365
-20
50
40
30
20
10
0
-10
-20
-30
-40
-50
80
Temperature (ºC)
100
90
80
70
60
50
40
30
20
10
0
-40
Typical On-Resistance vs. Temperature
(IF=10mA, IL=50mADC)
Temperature (ºC)
LED Current (mA)
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
-20
Blocking Voltage (VP)
LED Current (mA)
-40
0.050
0.045
0.040
0.035
0.030
0.025
0.020
0.015
0.010
0.005
0
-40
Leakage (PA)
Turn-On Time (ms)
1.50
Typical Turn-Off Time
vs. Temperature
(IF=10mA, IL=50mADC)
On-Resistance (:)
Typical Turn-On Time
vs. Temperature
(IL=50mADC)
-20
0
20
40
60
80
100
0
-40
-20
0
20
40
60
80
100
Temperature (ºC)
Temperature (ºC)
Energy Rating Curve
0.45
Load Current (A)
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0
10Ps 100Ps 1ms 10ms 100ms
1s
10s
100s
Time
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
4
www.ixysic.com
R09
INTEGRATED CIRCUITS DIVISION
OAA160
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to
the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper
operation of our devices when handled according to the limitations and information in that standard as well as to any
limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device
Moisture Sensitivity Level (MSL) Rating
OAA160 / OAA160S / OAA160P
MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Soldering Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device
Maximum Temperature x Time
Maximum Reflow Cycles
OAA160
250ºC for 30 seconds
-
OAA160S
250ºC for 30 seconds
3
OAA160P
260ºC for 30 seconds
3
Board Wash
IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to
remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as
an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary
if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used.
Cleaning methods that employ ultrasonic energy should not be used.
R09
www.ixysic.com
5
INTEGRATED CIRCUITS DIVISION
OAA160
Mechanical Dimensions
OAA160
2.540 ± 0.127
(0.100 ± 0.005)
9.652 ± 0.381
(0.380 ± 0.015)
8-0.800 DIA.
(8-0.031 DIA.)
2.540 ± 0.127
(0.100 ± 0.005)
9.144 ± 0.508
(0.360 ± 0.020)
6.350 ± 0.127
(0.250 ± 0.005)
Pin 1
PCB Hole Pattern
7.620 ± 0.254
(0.300 ± 0.010)
6.350 ± 0.127
(0.250 ± 0.005)
3.302 ± 0.051
(0.130 ± 0.002)
0.457 ± 0.076
(0.018 ± 0.003)
7.620 ± 0.127
(0.300 ± 0.005)
7.239 TYP.
(0.285)
4.064 TYP
(0.160)
7.620 ± 0.127
(0.300 ± 0.005)
0.254 ± 0.0127
(0.010 ± 0.0005)
Dimensions
mm
(inches)
0.813 ± 0.102
(0.032 ± 0.004)
OAA160P
0 MIN / 0.102 MAX
(0 MIN / 0.004 MAX)
2.540 ± 0.127
(0.100 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
7.620 ± 0.254
(0.300 ± 0.010)
9.398 ± 0.127
(0.370 ± 0.005)
Pin 1
2.286 MAX.
(0.090 MAX.)
2.54
(0.10)
0.635 ± 0.127
(0.025 ± 0.005)
8.70
(0.3425)
1.55
(0.0610)
0.203 ± 0.013
(0.008 ± 0.0005)
9.652 ± 0.381
(0.380 ± 0.015)
PCB Land Pattern
0.65
(0.0255)
2.159 ± 0.025
(0.085 ± 0.001)
0.457 ± 0.076
(0.018 ± 0.003)
0.864 ± 0.120
(0.034 ± 0.004)
Dimensions
mm
(inches)
OAA160S
9.652 ± 0.381
(0.380 ± 0.015)
2.540 ± 0.127
(0.100 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
Pin 1
0.635 ± 0.127
(0.025 ± 0.005)
3.302 ± 0.051
(0.130 ± 0.002)
9.525 ± 0.254
(0.375 ± 0.010)
0.457 ± 0.076
(0.018 ± 0.003)
PCB Land Pattern
2.54
(0.10)
8.90
(0.3503)
1.65
(0.0649)
7.620 ± 0.254
(0.300 ± 0.010)
0.254 ± 0.0127
(0.010 ± 0.0005)
0.65
(0.0255)
4.445 ± 0.127
(0.175 ± 0.005)
Dimensions
mm
(inches)
0.813 ± 0.102
(0.032 ± 0.004)
6
www.ixysic.com
R09
INTEGRATED CIRCUITS DIVISION
OAA160
OAA160PTR Tape & Reel
2.00
(0.079)
330.2 DIA.
(13.00 DIA.)
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
Embossment
W = 16.00
(0.63)
7.50
(0.295)
Bo = 10.30
(0.406)
K0 = 2.70
(0.106)
K1 = 2.00
(0.079)
Embossed Carrier
4.00
(0.157)
Ao = 10.30
(0.406)
P = 12.00
(0.472)
User Direction of Feed
Dimensions
mm
(inches)
NOTES:
1. All dimensions carry tolerances of EIA Standard 481-2
2. The tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2
OAA160STR Tape & Reel
330.2 DIA.
(13.00 DIA.)
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
K0 =4.90
(0.193)
K1 =4.20
(0.165)
Embossed Carrier
Embossment
W=16.00
(0.63)
Bo=10.30
(0.406)
Ao=10.30
(0.406)
P=12.00
(0.472)
User Direction of Feed
Dimensions
mm
(inches)
NOTES:
1. Dimensions carry tolerances of EIA Standard 481-2
2. Tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2
For additional information please visit our website at: www.ixysic.com
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to
its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
7
Specification: DS-OAA160-R09
©Copyright 2014, IXYS Integrated Circuits Division
OptoMOS® is a registered trademark of IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
11/4/2014