SF50 Series

COMPONENTS PRODUCT INFORMATION
NEW
Micro SIM Card Connector
CONNECTOR
SF50 Series
MB-0237-1
October 2011
RoHS Compliant
For mobile phones there is a gradual shift from the conventional plug-in-SIM cards to
the smaller micro SIM cards.
The “SF50 Series” is a pull-lever type connector which is compatible with the micro
SIM card.
* SIM: Subscriber Identity Module
Features
1.2mm height, 13.6mm width, and 15.6mm depth; achieves space saving and
industry’s lowest-in-class profile.
Simple structure and easy operation with pull-lever.
Resin used for pull-lever material ensures robust structure and is also compatible with
reflow mounting.
Location of pull-lever is available in left and right side variations.
Balanced 6 hold-down points for good EMI performance.
Pb-free, halogen-free compliant product.
Supports automated mounting with embossed tape.
Applications
Smartphone, mobile phone, tablet devices, and others
General Specifications
No. of Contacts: 6 positions
(compatible with 8 positions)
Contact Resistance: 100m max.
Dielectric Withstanding Voltage:
AC500Vr.m.s. per minute
Operating Temperature:
-25 Deg. C to +85 Deg. C
Rated Current: 0.5A/ per pin
Rated Voltage: 10V/ per pin
Durability: 5,000 times
JAE PMK Div. Proprietary. Copyright © 2011，Japan Aviation Electronics Industry, Ltd.
1/4
MB-0237-1
Materials and Finishes
Component
Contact
Material / Finish
Copper alloy / Au plating over Ni (contact area)
Housing
Synthetic resin
Cover Frame
Stainless steel / Terminal area: Au flash plating over Ni
Pull Bar
Synthetic resin / Black
Ordering Information
SF50 S 006 V 4 A R****
Reel Part Number (Note)
Series
Modification Code
A: Standard, B: Reverse
No. of Contacts
6: 6 pos.
Contact Area Finish
4: Au 0.5m min.
V: SMT mounting with hold-downs
Note) An embossed tape reel contains 1,500 pcs.
Please contact us for details on embossed tape specifications.
Product Variations
Part Number
SJ Drawing
Remarks
SF50S006V4A
SJ111457
Pull-lever left side (STD type)
SF50S006V4B
SJ111460
A type reverse
SF50S006V4C
SJ111463
Pull-lever right side (STD type)
In Common
JACS-10787
JAHL-10787
Specification
Handling Instruction
JAE PMK Div. Proprietary. Copyright © 2011，Japan Aviation Electronics Industry, Ltd.
2/4
MB-0237-1
Product Drawing
■SF50S006V4A
Unit: mm
Note 1. Do not apply force to this surface.
Note 2. Vacuum area.
*Please refer to SJ Drawing when considering this product.
JAE PMK Div. Proprietary. Copyright © 2011，Japan Aviation Electronics Industry, Ltd.
3/4
MB-0237-1
Unit: mm
Applicable Board Dimensions (for reference)
Note 3. Bottom area is metal (ground) so only ground pattern and ground via hole
are allowed in this area.
Note 4. Pattern and via hole cannot be applied to this area due to moving parts.
Notice: Products shown in this brochure are made
Product Marketing Division
Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539
Phone: +81-3-3780-2763 FAX: +81-3-3780-2946
for the applications listed below. However, if the
above-mentioned products are to be used in aerospace
devices, marine cable-connection devices, atomic
power control systems, medical equipment for lifesupport systems, or any other specific application
requiring extremely high reliability, please contact
JAE for further information.
Recommended applications: computers, office
machines, measuring devices, telecommunication
devices (terminals, mobile devices), AV devices,
household applications, FA devices, etc.
* The specifications in this brochure are subject to change without notice. Please contact JAE for information.
JAE PMK Div. Proprietary. Copyright © 2011，Japan Aviation Electronics Industry, Ltd.
4/4