KINGTRONICS GBU406

Website: www.kingtronics.com
Email: [email protected]
Tel: (852) 8106 7033
Fax: (852) 8106 7099
GBU4005 THRU GBU410
Single Phase 4.0 AMPS. Glass Passivated Bridge Rectifiers
Voltage Range 50 to 1000 Volts Current 4.0 Amperes
GBU
FEATURES
◆Ideal for printed circuit board
◆Reliable low cost construction technique
results in inexpensive product
◆High temperature soldering guaranteed:
250℃
/ 10 seconds / 0.375” ( 9.5mm )
lead length at 5 lbs., ( 2.3 kg ) tension
◆UL Recognized File number: E347214
MECHANICAL DATA
◆Case: Molded plastic
◆Lead: solder plated
Dimensions in inches and (millimeters)
◆Polarity: As marked
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%
GBU
GBU
GBU
GBU
GBU
GBU
GBU
4005
401
402
404
406
408
410
UNITS
Maximum Repetitive Peak Reverse Voltage
VRRM
50
100
200
400
600
800
1000
V
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700
V
Maximum DC blocking Voltage
VDC
50
100
200
400
600
800
1000
V
Maximum Average Forward Rectified Current
@TC = 100℃
I(AV)
4.0
A
IFSM
150
A
1.0
V
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
Load (JEDEC method )
Maximum Instantaneous Forward Voltage
@ 2.0A
VF
@ 4.0A
Maximum DC Reverse Current @ TA=25℃
IR
rated DC blocking voltage per leg TA = 125℃
1.1
50
μA
500
Typical Thermal Resistance (Note1)
RθJA
20
(Note2)
RθJL
4.0
℃/W
Operating Temperature Range
TJ
-55 to +150
℃
Storage Temperature Range
TSTG
-55 to +150
℃
NOTE:1. Mounted on P.C.B. with 0.5×0.5”(12×12mm) Copper Pads,0.375”(9.5mm)Lead Length.
2. Mounted on Al. Plate of 2.0×3.0×0.25”Al-Plate Heatsink.
1
Website: www.kingtronics.com
Email: [email protected]
Tel: (852) 8106 7033
Fax: (852) 8106 7099
GBU4005 THRU GBU410
RATING AND CHARACTERISTIC CURVES GBU4005 THRU GBU410
Note: Specifications are subject to change without notice.
2