Single Phase 4.0 AMPS.Glass Passivated Bridge

D4UB05 THRU
D4UB100
Single Phase 4.0 AMPS. Glass Passivated Bridge Rectifiers
Voltage Range 50 to 1000 Volts Current 4.0 Amperes
Package: D3K
FEATURES
◆Ideal for printed circuit board
◆Reliable low cost construction technique
results in inexpensive product
◆High temperature soldering guaranteed:
250℃ / 10 seconds / 0.375” ( 9.5mm )
lead length at 5 lbs., ( 2.3 kg ) tension
◆UL Recognized File number: E347214
MECHANICAL DATA
◆Case: Molded plastic
◆Lead: solder plated
◆Polarity: As marked
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%
Type Number
D4UB
05
D4UB
10
D4UB
20
D4UB
40
D4UB
60
D4UB
80
D4UB
100
UNITS
Maximum Repetitive Peak Reverse Voltage
VRRM
50
100
200
400
600
800
1000
V
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700
V
Maximum DC blocking Voltage
VDC
50
100
200
400
600
800
1000
V
Maximum Average Forward Rectified Current @T C =138℃
I(AV)
4.0
A
IFSM
135
A
VF
1.00
V
IR
10
500
μA
55
15
1.5
℃/W
TJ
-55 to +150
℃
TSTG
-55 to +150
℃
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated Load (JEDEC method)
Maximum Instantaneous Forward Voltage @ 2.0A
Maximum DC Reverse Current @ TA=25℃
rated DC blocking voltage per leg T A = 125℃
Rθ
Typical Thermal Resistance (Note 1)
(Note 2)
(Note 3)
JA
RθJL
Rθ
JC
Operating Temperature Range
Storage Temperature Range
NOTE:1. Junction to ambient, Without heatsink. 2. Junction to Lead,Without heatsink. 3. Junction to case,With heatsink.
Website: www.kingtronics.com
Email: [email protected]
Tel: (852) 8106 7033
Fax: (852) 8106 7099
1
D4UB05 THRU
D4UB100
RATING AND CHARACTERISTIC CURVES D4UB05 THRU D4UB100
FIG. 1-MAXIMUM NONO-REPETITIVE FORWARD SURGE
FIG. 2-MAXIMUM FORWARD CURRENT DERATING CURVE
CURRENT PER BRIDGE ELELMENT
CASE TEMPERATURE.(℃)
NUMBER OF CYCLES AT 60Hz
FIG. 4-TYPICAL REVERSE CHARACTERISTICS PER
FIG. 3-TYPICAL INSTANTANEOUS FORWARD
BRIDGE ELEMENT
CHARACTERISTICS PER BRIDGE ELEMENT
INSTANTANEOUS FORWARD VOLTAGE.(V)
PERCENT OF RATED PEAK REVERSE VOLTAGE.(%)
Note: Specifications are subject to change without notice.
Website: www.kingtronics.com
Email: [email protected]
Tel: (852) 8106 7033
Fax: (852) 8106 7099
2