MBS-SERIES 䡵 Features (1) For equipment designed to meet EMI regulations such as VCCI, CISPR, FCC, VDE, etc. (2) Attenuation effect against high voltage pulse noise (3) Attenuates conductive emission from power supply (4) Leakage current: 1mA max. (250V, 60Hz) (5) High shielded effect MBS-1230-22 MBS-1220-22 䡵 Safety standard UL1283, CSA Std. C22. 2 No. 8 VDE0565 Teil. 3 VDE0565 will transfer to EN133200 on and after July 23, 2003. ( MBS-1205-22 MBS-1210-22 ) MBS-1215-22 䡵 Specifications Model Item 1 Rated voltage (AC, DC) MBS-1205-22 MBS-1210-22 MBS-1215-22 5A (Note 1) 10A (Note 1) 15A (Note 2) Rated current (AC, DC) 3 Test voltage (terminal to case, AC 1 minute) 2500V 4 Isolation resistance (terminal to case, 500VDC) 100MΩ min. Leakage current MBS-1230-22 20A (Note 2) 30A (Note 2) 0.02Ω max. 0.01Ω max. 250V 2 5 MBS-1220-22 0.5mA max. 125V, 60Hz 1mA max. 250V, 60Hz 6 DC resistance 7 Temperature rise 8 Operating temperature range 9 Weight 0.15Ω max. 0.05Ω max. 0.03Ω max. 30°C max. 35°C max. –25 ~ +85°C (typ) 310g 310g 550g 550g 1,100g 䡵 Circuit 䡵 Derating MBS-1205, -1210, -1215, -1220 R: Breeder resistance MBS-1230 R: Breeder resistance 䢇 Request customer specification for further details of specifications, outline, characteristics, etc. Read the instruction manual before usage. 䢇 Contact us about delivery before ordering. 145 Noise Filter (Note 1) : Value at Ta < = 55°C. Refer to the derating curve (A) shown below at Ta > 55°C. (Note 2) : Value at Ta < = 50°C. Refer to the derating curve (B) shown below at Ta > 50°C. MBS-SERIES 䡵 MBS-1205-22 䡵 MBS-1210-22 Case: Metal (Unit: mm) 䡵 MBS-1215-22 䡵 MBS-1220-22 Noise Filter Case: Metal (Unit: mm) 䡵 MBS-1230-22 Case: Metal (Unit: mm) 146 MBS-SERIES CHARACTERISTICS .............. Symmetrical ———— Asymmetrical Attenuation (dB) Attenuation (dB) 䡵 Typical Insertion Loss Frequency (MHz) Attenuation (dB) Noise Filter Attenuation (dB) Frequency (MHz) Frequency (MHz) Attenuation (dB) Frequency (MHz) Frequency (MHz) 147