KBJ6005-KBJ610 Silicon Bridge Rectifiers REVERSE VOLTAGE - 50 to 1000Volts FORWARD CURRENT - 6.0 Amperes KBJ ? .134(3.4) ? .122(3.1) .213(5.4) .197(5.0) .173(4.4) .157(4.0) Ideal for printed circuit board Low forward voltage drop,high current capability Reliable low cost construction utilizing molded plastic technique results in inexpensive product The plastic material has U/L flammability classification 94V-0 .106(2.7) .096(2.3) .094(2.4) .075(1.9) .043(1.1) .035(0.9) ~ ~ _ + ? .134(3.4) ? .122(3.1) Rating to 1000V PRV .165(4.2) .142(3.6) .708(18.0) .669(17.0) .441(11.2) .425(10.8) Features .198 (5.1) .800(20.3) .776(19.7) 1.193(30.3) 1.169(29.7) .114(2.9) .098(2.5) .031(0.8) .023(0.6) .402(10.2) .303(7.7).303(7.7) SPACING .386(9.8) .287(7.3).287(7.3) Dimensions in inches and (milimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS SYMBOL KBJ6005 KBJ601 KBJ602 KBJ604 KBJ606 KBJ608 KBJ610 UNIT 100 200 400 600 800 1000 V Maximum Recurrent Peak Reverse Voltage VRRM 50 Maximum RMS Voltage VRMS 30 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Maximum DC Blocking Voltage Maximum Average Forward (with heatsink Note 2) Rectified Current @ TC=100℃ (without heatsink) I(AV) 6.0 2.8 A Peak Forward Surage Current 8.3ms Single Half Sine-Wave IFSM 175 A VF 1.0 V Super Imposed on Rated Load (JEDEC Method) Maximum Forward Voltage at 3.0A DC Maximum DC Reverse Current @ TJ=25℃ at Rated DC Blocking Voltage @ TJ=125℃ IR 10 500 uA I2t Rating for Fusing (t<8.3ms) I2t 120 A2s Typical Junction Capacitance Per Element (Note1) CJ 55 pF RθJC 1.8 ℃/W TJ -55 to +125 ℃ TSTG -55 to +150 ℃ Typical Thermal Resistance (Note2) Operating Temperature Range Storage Temperature Range NOTES: 1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2.Device mounted on 75mm*75mm*1.6mm cu plate heatsink. http://www.luguang.cn mail:[email protected] KBJ6005-KBJ610 Silicon Bridge Rectifiers Ratings AND Charactieristic Curves FLG.2-MAXIMUM NON-REPETITIVE SURGE CURRENT 180 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT AMPERES FIG.1-FORWARD CURRENT DERATING CURVE 6.0 WITH HEATSINK 5.0 4.0 WITHOUT HEATSINK 3.0 2.0 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 1.0 0.00 0.1 0 20 40 60 100 80 120 140 160 PULSE WIDTH 8.3ms SINGLE HALF-SINE-WAVE (JEDEC METHOD) 120 80 40 0 0 CASE TEMPERATURE, °C 10 5 2 20 100 50 NUMBER OF CYCLETS AT 60Hz FIG.3-TYPICAL JUNCTION CAPACITANCE FIG.4-TYPICAL FORWARD CHARACTERISTICS 100 INSTANTANEOUS FORWARD CURRENT, (A) 10 T J=25℃,f=1MHZ 1.0 1.0 10.0 100 1.0 T J = 25°C PULSE WIDTH 300us 0.1 0.01 0 REVERSE VOLTAGE,(VOLTS) 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.5-TYPICAL REVERSE CHARACTERISTICS 1000 INSTANTANEOUS REVERSE CURRENT ,(uA) CAPACITANCE,(pF) 10 T J=125℃ 100 ℃ TJ = 100 10 TJ ℃ =50 1.0 T J=25℃ 0.1 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) http://www.luguang.cn mail:[email protected] 1.8