COTCO LUMINANT DEVICE (HUIZHOU) LTD. SPECIFICATION FOR COTCO LED LAMP Document No: Model No : Rev. No: Date: SPE/LO566UHR4-70H-A3-MT LO566UHR4-70H-A3-MT 00 2007-10-11 Description: 70 Degree 5mm Oval LED Lamp in High Red Color with Tinted Diffused Lens and No Stopper *This specification is only for MT Dice Material: AlGaInP Confirmed By Customer: Date: ATTENTION OBSERVE PRECAUTIONS ELECTROSTATIC SENSITIVE DEVICES Document No. Rev. No. App lication s: - SPE/LO566UHR4-70H-A3-MT 00 Dimen sion Drawing Full Color Display Absolu te Maximu m Ratings at Ta = 25°C Items Absolute maximum Symbol Unit Rating IF 50 mA Peak Forward Current IFP 200 mA Reverse Voltage VR 5 V Power Dissipation PD 130 mW Operation Temperature Topr -40 ~ + 95 °C Storage Temperature Tstg -40 ~ +100 °C *2 Forward Current *1 Lead Soldering Temperature Electrostatic Discharge Classification (MIL-STD-883E) Max.260°C for 3 sec Max. Tsol (3mm from the base of the epoxy bulb) ESD Class II *1 pulse width <=0.1msec duty <=1/10 *2 For long term performance the drive currents between 10mA and 30mA are recommended. Please contact COTCO sales representative for more information on recommended drive conditions. Typical Electrical & Op tical Characteristics ( Ta = 25°C) Items Symbol Condition Min. Typ. Max. Unit Forward Voltage VF IF = 20mA --- 2.1 2.6 V Reverse Current IR VR = 5V --- --- 100 µA Dominant Wavelength λD IF = 20mA 618 624 630 nm Luminous Intensity IV IF = 20mA 1100 2100 --- mcd 2θ½ H-H IF = 20mA --- 70 --- deg 2θ½ V-V IF = 20mA --- 40 --- deg 50% Power Angle 2/4 Format #: COTCO-D-074 REV.4 Document No. Rev. No. SPE/LO566UHR4-70H-A3-MT 00 Standard bins for LO566UHR4-70H-A3-MT (IF = 20mA): Lamps are sorted to Luminous Intensity –IV & Dominant Wavelength –λD bins shown. Orders for LO566UHR4-70H-A3-MT may be filled with any or all bins contained as below. All Luminous Intensity –IV & Dominant Wavelength –λD values shown and specified are at I F =20mA. * T+ W or above 3000mcd Luminous Intensity (IV) V 2130mcd U 1520mcd T 1100mcd 618nm 630nm Dominant Wavelength (λD) * T+ indicates Luminous Intensity is at T bin or above. Forward Voltage (VF) Rank V1 V2 V3 V4 V5 Voltage 1.6-1.8 V 1.8-2.0 V 2.0-2.2 V 2.2-2.4 V 2.4-2.6 V Impo rtant Notes: 1) All ranks will be included per delivery; rank ratio will be based on the Dices distribution. 2) Pb content <1000PPM. 3) Tolerance of measurement of luminous intensity is ±15%. 4) Tolerance of measurement of dominant wavelength is ±1nm. 5) Tolerance of measurement of Vf is ±0.05 V. 6) Packaging methods are available for selection, Please refer to PACKAGING STANDARD. 7) Please refer to LED LAMP RELIABILITY TEST STANDARD for reliability test conditions. 8) Please refer to APPLICATION NOTES for Application. Graphs 3/4 Format #: COTCO-D-074 REV.4 Document No. Rev. No. If (mA) -50 -60 100.0 -40 SPE/LO566UHR4-70H-A3-MT 00 -30 -20 -10 0.0 Vr(V) 80.0 -10.0 60.0 -20.0 40.0 -30.0 20.0 -40.0 0.0 1.8 2.0 2.2 2.4 2.6 2.8 FIG.1 FORWARD CURRENT VS. Vf(V) -50.0 Ir(uA) FIG.2 REVERSE CURRENT VS. FORWARD VOLTAGE. REVERSE VOLTAGE. Half Power WL=23nm Domi WL= 624nm 5.0 4.0 100% 3.0 75% 2.0 50% 25% 1.0 If(mA) 0.0 0.0 20.0 40.0 60.0 0% 300 80.0 100.0 400 500 600 700 WL(nm) 800 FIG.4 RELATIVE LUMINOUS INTENSITY VS. FIG.3 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT. WAVELENGTH. H-H : 70 50% Power Angle : IF(mA) V-V : 40 100 H-H 80 V-V Ie(%) 0 100% 60 80% 40 60% 20 40% Ta( C) 0 0.0 20.0 40.0 60.0 20% 80.0 100.0 -90 -60 -30 0 30 60 90 0% FIG.5 MAXIMUM FORWARD DC CURRENT VS AMBIENT TEMPERATURE (Tjmax=105 C) FIG.6 FAR FIELD PATTERN 1. Cathode PAD Area (0.18 x 0.18inch2) 2. Height above nominal seating plane in inches(0.3inch) Items Signatures Date Prepared by LiuYin 2007-10-11 Checked by MaJF 2007-10-11 Approved by David 2007-10-11 FCN# Revision History Rev. No Date Change Description FCN20070 Data is subject to change without prior notice. Copyright@2002 Cotco International Ltd. 4/4 Format #: COTCO-D-074 REV.4