COTCO LUMINANT DEVICE (HUIZHOU) LTD. SPECIFICATION FOR COTCO LED LAMP Document No: Model No : Rev. No: Date: SPE/LP377THR1-70G-01-MT LP377THR1-70G-01-MT 02 2005-09-15 Description: 70 Degree 7.6 x 7.6mm LED Lamp in High Red Color with Water Transparent Lens and Stopper *This specification is only for MT Dice Material: AlGaInP Confirmed by Customer: Date: ATTENTION OBSERVE PRECAUTIONS ELECTROSTATIC SENSITIVE DEVICES For part availability and ordering information please call Toll Free: 800.984.5337 Website: www.marktechopto.com | Email: [email protected] Document No. SPE/LP377THR1-70G-01-MT Rev. No. 02 Applications: - Dimension Drawing Advertising Signs Indicators Automotive Lighting Absolute Maximum Ratings at Ta = 25°C Items Absolute maximum Symbol Rating Unit Forward Current*2 IF 70 mA Peak Forward Current*1 IFP 200 mA Reverse Voltage VR 5 V Power Dissipation PD 220 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Lead Soldering Temperature Max.260°C for 5 sec Max. Tsol (3mm from the base of the epoxy bulb) *1 pulse width <=0.1msec duty <=1/10 *2 Heat sink is recommended to be adequated if the device is operated at ambient temperatures higher than 25 deg C. For long term performance the drive currents between 10mA and 50mA are recommended. Please contact COTCO sales representative for more information on recommended drive conditions. Typical Electrical & Optical Characteristics ( Ta = 25°C) Items Symbol Condition Min. Typ. Max. Unit Forward Voltage VF IF = 70mA --- 2.6 3.2 V Reverse Current IR VR = 5V --- --- 100 µA Dominant Wavelength λD IF = 70mA 620 628 637 nm Luminous Flux ΦV IF = 70mA 3000 4500 --- mlm 50% Power Angle 2θ½ IF = 70mA --- 70 --- deg 2/4 Format #: COTCO-D-074 REV.3 Document No. SPE/LP377THR1-70G-01-MT Rev. No. 02 Standard bins for LP377THR1-70G-01-MT (IF = 70mA): Lamps are sorted to Luminous Flux –ΦV , VF & Dominant Wavelength –λD bins shown. Orders for LP377THR1-70G-01-MT may be filled with any or all bins contained as below. All Luminous Flux –ΦV , VF & Dominant Wavelength –λD values shown and specified are at If=70mA. * J+ Luminous Flux (ΦV) L K J 620nm 637nm Dominant Wavelength (λD) Rank J K L Luminous Flux 3000-4200 mlm 3500-4800 mlm 4000-6100 mlm * J+ indicates Luminous Flux is at J bin or above. Forward Voltage (VF) Rank V4 V5 V6 V7 V8 Voltage 2.2-2.4V 2.4-2.6V 2.6-2.8V 2.8-3.0V 3.0-3.2 V Important Notes: 1) All ranks will be included per delivery, rank ratio will be based on the Dices distribution. 2) No tolerance in the measurement of luminous flux. 3) Tolerance of measurement of dominant wavelength is ±1nm. 4) Tolerance of measurement of Vf is ±0.05 V. 5) Packaging methods are available for selection, please refer to PACKAGING STANDARD. 6) Please refer to LED LAMP RELIABILITY TEST STANDARD for reliability test conditions. 7) Please refer to APPLICATION NOTES for Application Notes. 3/4 Format #: COTCO-D-074 REV.3 Document No. SPE/LP377THR1-70G-01-MT Rev. No. 02 Graphs 1. Cathode PAD Area (0.18 x 0.18 x 2inch2) 2. Height above nominal seating plane in inches(0.3inch) Items Signatures Date Prepared by LiuZM 2005-09-15 Rev. No Checked by Aldosin 2005-09-15 02 Approved by David 2005-09-15 FCN# Revision History Date Change Description 2005-09-15 Correct FIG.6 from 120deg to 70deg. FCN20050297 Data is subject to change without prior notice. Copyright@2002 Cotco International Ltd. 4/4 Format #: COTCO-D-074 REV.3