S Series Crystal 4.0mm X 2.5mm SMD Package Wide Frequency Range RoHS Compliant Tight Tolerance and Stability Frequency Range 12.000MHz to 50.000MHz Frequency Tolerance / Stability (See Part Number Guide for Options) Operating Temperature Range (See Part Number Guide for Options) Storage Temperature -40°C to +85°C Aging ±5ppm / first year max Shunt Capacitance 5pF Max Load Capacitance (See Part Number Guide for Options) Equivalent Series Resistance (ESR) Drive Level 10µW Typ / 100µW Max Insulation Resistance 500 Mega Ohms Min at 100VDC ±15VDC Environmental & Mechanical Detail Shock MIL-STD-883, Method 2002 Cond B Solderability MIL-STD-883, Method 2003 Solvent Resistance MIL-STD-202, Method 215 Vibration MIL-STD-883, Method 2007, Cond A Gross Leak Test MIL-STD-883, Method 1014, Cond C Fine Leak Test MIL-STD-883, Method 1014, Cond A2 MSL See ESR Chart Level 1 per IPC/JEDEC J-STD 20 Marking Detail Line 1: MXX.XXX XX.XXX = Frequency in MHz Line 2: SYMCCL S = Internal Code YM = Date Code (Year/Month) CC = Crystal Parameters Code L = Denotes RoHS Compliant MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Specifications are subject to change without notice. 05/29/12 J Pg 1 of 2 ESR Chart Frequency Range ESR (Ohms) Mode / Cut 12.000MHz to 15.999MHz 80 Max Fund / AT 16.000MHz to 29.999MHz 60 Max Fund / AT 30.000MHz to 50.000MHz 40 Max Fund / AT Part Number Guide S 1 Frequency 4mm x 2.5mm 4 pads Load Capacitance XX = XXpF (9pF to 50pF) Temperature Tolerance/Stability B = ±30 ppm / ±50 ppm F = ±30 ppm / ±30 ppm G = ±10 ppm / ±30 ppm N = ±10 ppm / ±10 ppm Operating Temperature A = 0°C to +70°c B = -20°C to +70°c C = -40°C to +85°c D = -10°C to +60°c E = -10°C to +70°c F = -30°C to +85°c Packaging Mode of Operation 1 = Fundamental Blank = Bulk T = Tape and Reel Please Consult with MMD Sales Deparment for any other Parameters or Options Mechanical Details Tape & Reel 4.20 [.165] MAX PITCH MXX.X SYM TAPE WIDTH 0.75 [.030] MAX 3.00 [.118] 2.70 [.106] MAX 1 2 4 3 1.40 [.055] REEL DIA 0.90 [.035] 1.00 [.039] DIMENSION IN BRACKETS ARE IN INCHES 3.00 [.118] Q1 Q2 Q1 Q2 Q3 Q4 Q3 Q4 PITCH TAPE WIDTH REEL DIA QTY PER REEL PIN 1 ORIENT. 8.00 [.315] 12.00 [.472] 180[7 IN] 1000 Q1 NOTES: UNLESS OTHERWISE SPECIFIED 1. Applicable Standards / Specifications ANSI Y14.5M, Dimensions and Tolerances EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm Punched Carrier Taping of Surface Mount Components for Automatic Handling. 2. Dimensions are in millimeters. 3. Tolerances are ±0.10 [.004] mm unless otherwise specified. 4. Do not scale drawing. 1.60 [.063] 1.20 [.047] PIN 1 PIN 2 PIN 3 PIN 4 PIN CONNECTIONS CRYSTAL NO CONNECTION CRYSTAL NO CONNECTION DIRECTION OF FEED 1.40 [.055] SUGGESTED LAND PATTERN MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Specifications are subject to change without notice. 05/29/12 J Pg 2 of 2