MXH Series 2.0 x 2.5 Ceramic SMD Oscillator Low Profile SMD Package Hermetically Sealed Wide Frequency Range Custom Options Available Frequency Range Temperature Stability* Operating Temperature Range Storage Temperature Range Aging (+25°C ±3°C) Supply Voltage ±10% (Vdd) 1.544MHZ to 9.999MHZ 10.000MHZ to 34.999MHZ 35.000MHZ to 49.999MHZ 50.000MHZ to 66.000MHZ Supply Current +1.80 VDC 6mA max 7mA max 15mA max 25mA max Waveform Logic “0” Logic “1” Rise/Fall Time (10% to 90% of Supply Voltage) Load Symmetry (50% of waveform) Start-up Time Absolute Clock Period Jitter Tri-State Operation Vol = 30% Standby Current (only with “S” Option) * Inclusive of Temperature., Load and Voltage 1.544MHZ to 66.000MHZ (See Part Number Guide for Options) (See Part Number Guide for Options) -40°C to +85°C ±5ppm for first year +2.50 VDC +3.30 VDC +5.00 VDC 7mA max 8mA max 10mA max 8mA max 10mA max 20mA max 20mA max 25mA max 50mA max 30mA max 35mA max 60mA max HCMOS 10% Vdd max 90% Vdd min 4nSec 15pF (See Part Number Guide for Options) 10mSec max 1pSec Voh = 70% of Vdd min to Enable Output max or grounded to Disable Output (High Impedance) <7 Micro Amps Environmental & Mechanical Detail Shock MIL-STD-883, Method 2002 Cond B Solderability MIL-STD-883, Method 2003 Solvent Resistance MIL-STD-202, Method 215 Vibration MIL-STD-883, Method 2007, Cond A Gross Leak Test MIL-STD-883, Method 1014, Cond C Fine Leak Test MIL-STD-883, Method 1014, Cond A2 MSL Level 1 per IPC/JEDEC J-STD 20 Marking Detail First Line = XX.XX XX.XX (5 characters Max) Device Frequency = (four digits including decimal point) Second Line = SYWW (5 characters Max) Internal Code S = (may be one or two letters) YWW = Date Code (Year/Week) L = RoHS Compliant Pin 1 Indicator MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Subject to change without notice 08/12/11 I Pg 1 of 2 Part Number Guide MX Frequency H 2.0 X 2.5 Ceramic SMD Output H = HCMOS Symmetry Blank = 40/60% A = 45/55% Frequency Stability 020 = ±20ppm 025 = ±25 ppm 050 = ±50 ppm 100 = ±100 ppm Supply Voltage 1 = +1.8 VDC 2 = +2.5 VDC 3 = +3.3 VDC 5 = +5.0 VDC Packaging Blank = Bulk T = Tape and Reel Operating Temperature Blank = 0°C to +70°C 27 = -20°C to +70°C 48 = -40°C to +85°C Pin 1 Connection S = Standby H = Tri-state Please Consult with MMD Sales Department for any other Parameters or Options Mechanical Details X X .XX SYW W 1.70 [.067] 0.90 [.035] 0.90 [.036] 2.60 [.102] 0.65 [.026] 3 4 2 1 PIN PIN PIN PIN 2.10 [.083] P IN 1 D E SIG NA T O R LO CA TE D IN TH IS AR EA SU G G EST ED LAN D PAT TER N 0.80 [.031] D IM EN S IO N IN BRA C K ET S A RE IN IN C H ES E XT ERN A L B YPA SS CAP ACIT O R IS RE CO M M EN D ED PIN CO N N ECT IO N S 1 TRI-ST A T E /STAN D BY C ASE G R O U N D 2 3 O U T PU T 4 S U PPLY V O LT AG E 1.35 [.053] Tape & Reel Dimensions PITCH 16.00 REEL DIA Q1 Q2 Q1 Q2 Q3 Q4 Q3 Q4 PITCH TAPE WIDTH REEL DIA COUNT PIN 1 ORIENT. 4.00 [.157] 8.00 [.315] 180 [7.0] 1000 Q1 NOTES: UNLESS OTHERWISE SPECIFIED 1. Applicable Standards / Specifications ANSI Y14.5M, Dimensions and Tolerances EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm Punched Carrier Taping of Surface Mount Components for Automatic Handling. 2. Dimensions are in millimeters [inch]. 3. Tolerances are ±0.1 [.004] mm unless otherwise specified. 4. Do not scale drawing. DIRECTION OF FEED MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Subject to change without notice 08/12/11 I Pg 2 of 2