MIHK Series 5X7 Ceramic SMD Oscillator Low Profile SMD Package 32.768KHZ RoHS Compliant HCMOS Output Frequency 32.768KHZ Temperature Stability* (See Part Number Guide for Options) Operating Temperature Range (See Part Number Guide for Options) Storage Temperature Range -55°C to +125°C Aging (+25°C ±3°C) ±5ppm / year max at +25ºC Supply Voltage (See Part Number Guide for Options) Supply Current 7mA max Waveform HCMOS Logic “0” 10% Vdd max Logic “1” 90% Vdd min Rise/Fall Time (10% to 90% of Supply Voltage) 250nSec Symmetry (50% of waveform) 40%/60% Output Load 15pF or 10TTL Start-up Time 8mSec max Voh = 70% of Vdd min to Enable Output Vol = 30% max or grounded to Disable Output (High Impedance) Tri-State Operation * Inclusive of Temperature., Load and Voltage Mechanical & Environmental Detail Shock Solderability Solvent Resistance MIL-STD-883, Method 2002 Cond B MIL-STD-883, Method 2003 MIL-STD-202, Method 215 Marking Detail Line 1 = MXXXXX M = MMD XXXXX = Frequency in MHZ = Internal Code = 4 Digit Date Code (Year / Week) = Denotes RoHS Compliant Line 2 = SYYWWL S Vibration MIL-STD-883, Method 2007, Cond A YYWW Gross Leak Test MIL-STD-883, Method 1014, Cond C L Fine Leak Test MIL-STD-883, Method 1014, Cond A2 MSL Level 1 per IPC/JEDEC J-STD 20 Line 3 = XXXXX Internal use only May vary with lots Black dot to denote Pin 1 MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Subject to change without notice MIHK010311B Pg 1of 2 Part Number Guide MIHK 32.768KHZ 5 X 7 Ceramic SMD Frequency Stability 020 = ±20 ppm 025 = ±25 ppm 050 = ±50 ppm 100 = ±100 ppm Supply Voltage 2 = +2.8 VDC 3 = +3.3 VDC Operating Temperature Blank = 0°C to +70°C 27 = -20°C to +70°C 48 = -40°C to +85°C Pin 1 Connection H = Tri-State S = Stand-by Packaging Blank = Bulk T = Tape and Reel Please Consult with MMD Sales Department for any other Parameters or Options Mechanical Details 7.20 [.283] MAX XX.XX SYWW 5.08 [.200] 1.70 [.067] MAX 2.88 [.113] 1.81 [.071] 5.20 [.205] MAX PIN 1 INDICATOR 1.30 [.051] 3 4 2 1 2.60 [.102] Pin Connections Pin 1 Tri-state, N/C or Stand-by Pin 2 Case Ground Pin 3 Output Pin 4 Supply Voltage 2.00 [.079] 1.40 [.055] Dimension in Brackets are in Inches External Bypass Capacitor is Recommended 2.20 [.087] Suggested Land Pattern Tape & Reel Dimensions PITCH TAPE WIDTH REEL DIA Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 PITCH TAPE WIDTH REEL DIA QTY PER REEL PIN 1 ORIENT. 8.00 [.315] 16.00 [.630] 180[7 IN] 1000 Q1 NOTES: UNLESS OTHERWISE SPECIFIED 1. Applicable Standards / Specifications ANSI Y14.5M, Dimensions and Tolerances EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm Punched Carrier Taping of Surface Mount Components for Automatic Handling. 2. Dimensions are in millimeters. 3. Tolerances are ±0.10 [.004] mm unless otherwise specified. 4. Do not scale drawing. DIRECTION OF FEED MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Subject to change without notice MIHK010311B Pg 2of 2