MQTC & MQTT Series Ceramic SMD Oscillator Same day Shipping Available 3.2 X 5mm SMD Package RoHS Compliant Tape & Reel package Available Frequency Range 1.000MHZ to 125.000MHZ Frequency Stability (Inclusive of Temperature, Load and Voltage) See Part Number Guide Aging @ +25°C ±5 ppm per year max Operating Temperature Range See Part Number Guide -55°C to +125°C Storage Temperature Range Supply Voltage (Vdd) Supply Current +2.5 VDC ±10% +3.3 VDC ±10% +5.0 VDC ±10% 1.000MHZ to 40.000MHZ 14mA max 15mA max 25mA max 40.100MHZ to 70.000MHZ 20mA max 22mA max 40mA max 70.100MHZ and above 30mA max 30mA max 50mA max 15pF 30pF 10 TTL or 50pF Load Output Waveform (Option) TTL CMOS Logic “0” 0.4V max 10% Vdd max Logic “1” 2.4 V min 90% Vdd min Rise/Fall Time (20% to 80% Levels) 5nSec max Start Up Time Duty Cycle 5nSec max 7nSec max 10mSec max 1.000MHZ to 70.000MHZ 45%/55% (TTL @ 1.4V Level / CMOS @ 50% Waveform) 70.100MHZ and above 40%/60% (TTL @ 1.4V Level / CMOS @ 50% Waveform) Jitter (Peak to Peak) 25pS max VOH = 70% of Vdd min or No Connection to Enable Output VOL = 30% of Vdd max or grounded to Disable Output (High Impendence) Tristate Mechanical & Environmental Detail Shock MIL-STD-883, Method 2002 Cond B Solderability MIL-STD-883, Method 2003 Solvent Resistance MIL-STD-202, Method 215 Vibration MIL-STD-883, Method 2007, Cond A Gross Leak Test MIL-STD-883, Method 1014, Cond C Fine Leak Test MIL-STD-883, Method 1014, Cond A2 MSL Level 1 per IPC/JEDEC J-STD 20 Marking Detail Line 1 = MXXXXX M = MMD XXXXX = Frequency in MHZ S = Internal Code YYWW = 4 Digit Date Code (Year / Week) L = Denotes RoHS Compliant Line 2 = SYYWWL Line 3 = XXXXX Internal use only May vary with lots Black dot to denote Pin 1 MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Subject to change without notice 08/19/11 I Pg 1of 2 Part Number Guide MQT FREQUENCY H 3.2 X 5 CERAMIC SMD Frequency Stability 020 = ±20 ppm 025 = ±25 ppm 050 = ±50 ppm 100 = ±100 ppm Supply Voltage 2 = +2.5 VDC 3 = +3.3 VDC 5 = +5.0 VDC Output C = CMOS T = TTL Operating Temperature Blank = 0°C to +70°C 27 = -20°C to +70°C 48 = -40°C to +85°C Pin 1 Connection H = Tri-state PLEASE CONSULT WITH MMD SALES DEPARTMENT FOR ANY OTHER PARAMETERS OR OPTIONS Mechanical Details 1.20 [.047] MAX 5.20 [.205] MAX MXXXXX SYYWWL XXXXX 2.54 [.100] 3.40 [.134] MAX 3 4 2 1 2.54 [.100] 1.20 [.047] 2.20 [.087] 1.20 [.047] 1.20 [.047] PIN 1 PIN 2 PIN 3 PIN 4 PIN OUTPUT TRISTATE CASE GROUND OUTPUT SUPPLY VOLTAGE 1.40 [.055] DIMENSIONS IN BRACKETS ARE IN INCHES EXTERNAL BYPASS CAPACITOR RECOMMENDED SUGGESTED LAND PATTERN Tape & Reel Dimensions PITCH TAPE WIDTH Q1 Q2 Q1 Q2 Q3 Q4 Q3 Q4 REEL DIA DIRECTION OF FEED NO TES: UNLESS OTHERWISE SPECIFIED 1. Applicable Stand ards / Specifications ANSI Y14.5M, Dimen sions and Tolerances EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm Punched Carrier Tap ing of Surface Mount Components for Automatic Handling. 2. Dimensions are in millimeters. 3. Tolerances are ±0.10 [.004] mm unless otherwise sp ecified. 4. Do not scale drawing. PITCH TAPE WIDTH REEL DIA QTY PER REEL PIN 1 ORIENT. 8.00 [.315] 12.00 [.472] 178[7 IN] 1000 Q1 or Q4 MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Subject to change without notice 08/19/11 I Pg 2of 2