BNC Male Right Angle Connector Solder Attachment For PE-SR405AL, PE-SR405FL, RG405 TECHNICAL DATA SHEET PE4102 BNC Male Right Angle Connector Solder Attachment For PE-SR405AL, PE-SR405FL, RG405 Configuration Connector Connector Specification Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style BNC Male MIL-C-39012 PE-SR405AL,PE-SR405FL,RG405 Solder/Solder Right Angle Electrical Specifications Impedance, Ohms 50 Mechanical Specifications Temperature Operating Range, deg C -65 to +165 Size Length, in [mm] Width/Dia., in [mm] 0.89 [22.61] 0.57 [14.48] Weight, lbs [g] 0.013 [5.9] Connector Type Contact Material and Plating Contact Plating Specification Coupling Nut Material and Plating Body Material and Plating Body Plating Specification Dielectric Type BNC Male Silver QQ-S-365 Brass, Nickel Brass, Gold MIL-G-45204 Teflon . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: BNC Male Right Angle Connector Solder Attachment For PE-SR405AL, PE-SR405FL, RG405 PE4102 PE4102 REV 1 BNC Male Right Angle Connector Solder Attachment For PE-SR405AL, PE-SR405FL, RG405 TECHNICAL DATA SHEET PE4102 Plotted and Other Data Notes: Values at 25 °C, sea level BNC Male Right Angle Connector Solder Attachment For PE-SR405AL, PE-SR405FL, RG405 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: BNC Male Right Angle Connector Solder Attachment For PE-SR405AL, PE-SR405FL, RG405 PE4102 URL: http://www.pasternack.com/bnc-male-standard-pe-sr405al-pe-sr405fl-rg405-connector-pe4102-p.aspx PE4102 REV 2 © 2013 Pasternack Enterprises All Rights Reserved PE4102 REV 3. SOLDER CONTACT INTO SLOT, SOLDER OUTER CONDUCTOR TO BODY. PRESS DOWN CAP. 2. INSERT CABLE INTO BODY UNTIL OUTER CONDUCTOR BOTTOMS ON WITH CONNECTOR SHOULDER, THE CENTER CONDUCTOR WILL PROTRUDE INTO CONTACT SLOT. 1. STRIP CABLE AS SHOWN & TIN CENTER CONDUCTOR. ASSEMBLY PROCEDURES REV. - CAD FILE 042309 SCALE N/A SIZE A 127 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. FSCM NO. 53919 PE4102 DWG TITLE BNC Male Right Angle Connector Solder Attachment For PE-SR405AL, PE-SR405FL, RG405 PE4102 CAD Drawing 3