SMA Male Right Angle Connector Clamp/Solder Attachment For RG188-DS, RG316-DS TECHNICAL DATA SHEET PE4407 SMA Male Right Angle Connector Clamp/Solder Attachment For RG188-DS, RG316-DS Configuration Connector Connector Specification Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style SMA Male MIL-C-39012 RG188-DS,RG316-DS Clamp/Solder Right Angle Electrical Specifications Impedance, Ohms 50 Mechanical Specifications Temperature Operating Range, deg C -65 to +165 Size Length, in [mm] Width/Dia., in [mm] Height, in [mm] 0.715 [18.16] 0.312 [7.92] 0.615 [15.62] Weight, lbs [g] 0.013 [5.9] Connector Type Contact Material and Plating Contact Plating Specification Coupling Nut Material and Plating Hex Size, in. Torque, in-lbs [Nm] Body Material and Plating Dielectric Type SMA Male Gold MIL-G-45204 Brass, Nickel 5/16 5 [0.57] Brass, Nickel Teflon . Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMA Male Right Angle Connector Clamp/Solder Attachment For RG188-DS, RG316-DS PE4407 PE4407 REV 1 SMA Male Right Angle Connector Clamp/Solder Attachment For RG188-DS, RG316-DS TECHNICAL DATA SHEET PE4407 Compliance Certifications (visit www.Pasternack.com for current document) Plotted and Other Data Notes: Values at 25 °C, sea level SMA Male Right Angle Connector Clamp/Solder Attachment For RG188-DS, RG316-DS from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMA Male Right Angle Connector Clamp/Solder Attachment For RG188-DS, RG316-DS PE4407 URL: http://www.pasternack.com/sma-male-standard-rg188-ds-rg316-ds-connector-pe4407-p.aspx PE4407 REV 2 © 2013 Pasternack Enterprises All Rights Reserved PE4407 REV 3. SLIDE ASSEMBLY INTO BODY, WITH CENTER CONDUCTOR STARTING INTO SLOT OF CONTACT. TIGHTEN NUT SECURELY. SOLDER CENTER CONDUCTOR TO CONTACT & PRESS CAP INTO BODY. 2. FLARE BRAID, SLIDE CLAMP OVER AND UNDER BRAID UNTIL THE CLAMP STOPS. TRIM EXCESS BRAID TO THE DIAMETER OF CLAMP SHOULDER. TRIM CABLE TO DIMENSIONS SHOWN. DO NOT NICK CENTER CONDUCTOR. 1. SLIDE CLAMP NUT AND O-RING ONTO CABLE. STRIP CABLE TO DIMENSIONS SHOWN. DO NOT NICK BRAID. ASSEMBLY PROCEDURES REV. B CAD FILE 082908 SCALE N/A SIZE A 2233 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. FSCM NO. 53919 PE4407 DWG TITLE SMA Male Right Angle Connector Clamp/Solder Attachment For RG188-DS, RG316-DS PE4407 CAD Drawing 3