SMA Female Bulkhead Connector Crimp/Solder Attachment For RG178, RG196, .235 inch D Hole TECHNICAL DATA SHEET PE4422 SMA Female Bulkhead Connector Crimp/Solder Attachment For RG178, RG196, .235 inch D Hole Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style Mount Method SMA Female RG178,RG196 Crimp/Solder Straight Bulkhead Electrical Specifications Impedance, Ohms 50 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] 1.25 [31.75] 0.312 [8] Weight, lbs [g] 0.013 [5.9] Connector Type Contact Material and Plating Body Material and Plating Dielectric Type SMA Female Gold Brass, Nickel PTFE . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level SMA Female Bulkhead Connector Crimp/Solder Attachment For RG178, RG196, .235 inch D Hole from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMA Female Bulkhead Connector Crimp/Solder Attachment For RG178, RG196, .235 inch D Hole PE4422 URL: http://www.pasternack.com/sma-female-standard-rg178-rg196-connector-pe4422-p.aspx PE4422 REV 1 © 2013 Pasternack Enterprises All Rights Reserved PE4422 REV CONTACT: SOLDER FERRULE: .100" HEX CRIMP TOOL 3. SOLDER CONTACT TO CENTER CONDUCTOR. CLEAN, INSERT CABLE ASSEMBLY INTO BODY & TIGHTEN. 2. SLIDE FERRULE (1) OVER CABLE. FLAIR BRAID & SLIDE CLAMP NUT (2) UNDER BRAID WITH CENTER CONDUCTOR PROTRUDING THROUGH HOLE IN INSULATOR. SLIDE FERRULE (1) OVER BRAID & AGAINST CLAMP NUT (2). CRIMP FERRULE. 1. STRIP CABLE AS SHOWN. DO NOT NICK CENTER CONDUCTOR. TIN CENTER CONDUCTOR. ASSEMBLY PROCEDURES REV. A CAD FILE 082908 SCALE N/A SIZE A 127 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. FSCM NO. 53919 PE4422 DWG TITLE SMA Female Bulkhead Connector Crimp/Solder Attachment For RG178, RG196, .235 inch D Hole PE4422 CAD Drawing 2