D-Sub Receptacle Contact Crimp/Solder Attachment For RG174, RG316, RG187, RG188 TECHNICAL DATA SHEET PE4801 D-Sub Receptacle Contact Crimp/Solder Attachment For RG174, RG316, RG187, RG188 Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style D-Sub Receptacle RG174,RG316,RG187,RG188 Crimp/Solder Straight Electrical Specifications Impedance, Ohms 50 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] 0.94 [23.88] 0.22 [5.59] Weight, lbs [g] 0.006 [2.72] Connector Type Contact Material and Plating Outer Conductor Material and Plating Body Material and Plating Dielectric Type D-Sub Receptacle Gold Brass, Gold Brass, Gold PTFE . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level D-Sub Receptacle Contact Crimp/Solder Attachment For RG174, RG316, RG187, RG188 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: D-Sub Receptacle Contact Crimp/Solder Attachment For RG174, RG316, RG187, RG188 PE4801 URL: http://www.pasternack.com/d-sub-receptacle-standard-rg174-rg316-rg187-rg188-connector-pe4801-p.aspx PE4801 REV 01 1 © 2013 Pasternack Enterprises All Rights Reserved PE4801 REV 01 INSERT DIELECTRIC AND CENTER CONDUCTOR INTO BODY. SOLDER CENTER CONDUCTOR THROUGH HOLE IN BODY. REMOVE EXCESS SOLDER. SLIDE FERRULE FORWARD & CRIMP. 2. FERRULE: .128" HEX CRIMP TOOL CRIMP SIZE REQUIRED SLIDE FERRULE ONTO CABLE STRIP CABLE AS SHOWN & TIN CENTER CONDUCTOR. 1. ASSEMBLY PROCEDURES FSCM NO. 53919 PE4801 DWG TITLE CAD FILE 060702 SCALE N/A SIZE A 127 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. D-Sub Receptacle Contact Crimp/Solder Attachment For RG174, RG316, RG187, RG188 PE4801 CAD Drawing 2